Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FIXOLID
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint
Uses advised against
No additional information available
Manufacturers & Suppliers
FILAgroup France
manufacturer
route de Marson, 64, 51240 Saint Germain la Ville, France
03.26.69.26.26
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
Medicines & Poisons Info Office
+356 2545 6508
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-butyl acetate EC: 204-658-1 | 123-86-4 | 51 - 56% | Yes |
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 0.2 - 7.5% | No |
| Carbon black EC: 215-609-9 | 1333-86-4 | 5% | No |
| Toluene EC: 203-625-9 | 108-88-3 | 0.7 - 0.8% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the affected person away from the contaminated area and into the fresh air. Get medical advice/attention if you feel unwell.
Symptoms: May cause drowsiness or dizziness.
Wash with water and soap as a precaution. If skin irritation occurs: Get medical advice/attention.
Symptoms: Prolonged or repeated contact may cause skin to become dry or cracked.
Rinse eyes with water as a precaution. In case of redness or irritation, call a doctor.
Symptoms: redness or irritation
Rinse mouth out with water. Do not induce vomiting. Get medical advice/attention.
Immediate Medical Attention
Get medical advice/attention if you feel unwell. In case of redness or irritation, call a doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Carbon dioxide (CO2). Foam.
Do not use a heavy water stream.
Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
Cool down the containers exposed to heat with a water spray. Contain the extinguishing fluids by bunding.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes. Do not breathe vapours. In case of important spillage: Only qualified personnel equipped with suitable protective equipment may intervene.
Contain the spilled material by bunding. Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Wash non-recoverable remainder with large amounts of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid contact with skin and eyes. Do not breathe vapours. Avoid the build-up of electrostatic charge. Ground/bond container and receiving equipment. Do not smoke. No flames, no sparks. Eliminate all sources of ignition. Use explosion-proof equipment.
Keep in a cool, well-ventilated place away from heat. Protect from sunlight. Keep away from ignition sources. Keep container tightly closed.
Do not drink, eat or smoke in the workplace. Always wash hands after handling the product.
Do not smoke. No flames, no sparks. Eliminate all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Breakthrough time (min) : >= 480
Protective goggles
In case of insufficient ventilation, wear suitable respiratory equipment
Protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use.
Flammable liquid and vapour.
Flammable or explosive vapour/air mixtures may be formed.
High temperature.
Strong oxidizing agents. Strong acids. Strong bases.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with relevant local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT (N-butyl acetate)
- Transport Class
- 3
- Packing Group
- III
Special provisions for carriage - Packages (ADR): V12; Special provisions for carriage - Operation (ADR): S2
Stowage category (IMDG): A
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FIXOLID?
The signal word is warning.
What is the physical form of FIXOLID?
FIXOLID is a liquid with variable. color. It has n-butyl acetate. odor.
What is the solubility of FIXOLID?
Poorly soluble in water.
What is FIXOLID used for?
Paint
What are the hazard statements for FIXOLID?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
What is the melting point of FIXOLID?
The melting point is Not available and the boiling point is > 100 °C.