NextSDS Logo
Safety Data Sheet EN

VERDÜNNUNG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
VERDÜNNUNG
Product Code
V-568

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Solvent Industrial uses: Uses of substances as such or in preparations at industrial sites Professional uses: Public domain (administration, education, entertainment, services, craftsmen)

Uses advised against

Do not use for private purposes (household).

Manufacturers & Suppliers

G

Geholit + Wiemer Lack- und Kunststoff-Chemie GmbH

manufacturer

Sofienstraße 36, 76676 Graben-Neudorf

+49 (0) 7255 / 99 0

Emergency Contacts

Emergency Contact

+49 (0) 7255 / 99 299

Mo - Thu 7.00 - 17.00 Uhr Fr 7.00 - 15.30 Uhr Only available during office hours.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304
Acute Tox. Cat. 4 H332
Eye Dam. Cat. 1 H318
Skin Irrit. Cat. 2 H315
Flam. Liq. Cat. 2 H225
STOT SE Cat. 3 H335
STOT RE Cat. 2 H373

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P310 Immediately call a POISON CENTER/doctor/...
P321 Specific treatment (see ... on this label).
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
XYLENE EC: 215-535-7 1330-20-7 40 - 45% Yes
4-METHYLpentAN-2-ONE EC: 203-550-1 108-10-1 30 - 35% Yes
ETHYLBENZENE EC: 202-849-4 100-41-4 10 - 15% Yes
2-METHYLPROPAN-1-OL EC: 201-148-0 78-83-1 10 - 15% Yes
N-BUTYL ACETATE EC: 204-658-1 123-86-4 1 - 5% Yes

Full text of H- and EUH-phrases: see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician. Provide fresh air.

Symptoms: Respiratory complaints

Skin contact

Wash immediately with: Water and soap In case of skin irritation, consult a physician.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.

Ingestion

Do NOT induce vomiting. Rinse mouth thoroughly with water. Let water be drunken in little sips (dilution effect).

Immediate Medical Attention

In case of accident or unwellness, seek medical advice immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

alcohol resistant foam, ABC-powder, Extinguishing blanket

Unsuitable media

High power water jet

Specific hazards

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)

Instructions

Use water spray jet to protect personnel and to cool endangered containers.

Firefighter Protection

Do not inhale explosion and combustion gases. Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection equipment. Remove all sources of ignition. Provide adequate ventilation.

Environmental

Ensure waste is collected and contained.

Cleanup methods

Absorb with liquid-binding material

Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Inhalation of vapours or spray/mists Skin contact Eye contact Only use the material in places where open light, fire and other flammable sources can be kept away. Handle and open container with care. Keep away from sources of ignition. - No smoking. When using do not eat, drink, smoke, sniff.

Storage

Keep only in the original container in a cool, well-ventilated place. Keep container tightly closed. Floors should be impervious, resistant to liquids and easy to clean. Protect against Heat. UV-radiation/sunlight.

Hygiene

When using do not eat, drink, smoke, sniff.

Fire prevention

Only use the material in places where open light, fire and other flammable sources can be kept away. Keep away from sources of ignition. - No smoking. Vapours are heavier than air, spread along floors and form explosive mixtures with air. Take precautionary measures against static discharges. Provide earthing of containers, equipment, pumps and ventilation facilities.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.

Hands

Use protective gloves in accordance with EN 374. Please observe the intended use instructions and permeation times of the glove manufacturer! The indicated permeation times are valid for full contact activities. Full contact gloves should offer permeation times over 120 minutes. Gloves with shorter permeation times are only suitable for short term contact. Contaminated gloves should be disposed of immediately, splattered gloves should be disposed of after the maximum wear time has been reached, at the latest at the end of the work shift. For long, intense, or multiple contact suitable material: laminate film, e.g. Barrier made by Ansell or comparable products. Material thickness: > 0,052 mm. Permeation time > 480 minutes.

Eyes

Eye glasses with side protection

Respiratory

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Respiratory protection necessary at: exceeding exposure limit values. Combination filtering device (EN 14387)

Skin/Body

Required properties antistatic. Recommended material Natural fibres (e.g. cotton)

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
---
Odor
characteristic like: Solvent
Solubility In Fat
---
Crystallisation Point
---
Decomposition Temperature
---
Kinematic Viscosity
---
Vapor Density
---
Appearance
transparent colourless
Evaporation Rate
---
Physical State Data
liquid
Bulk Density
---
Ph
---
Physical State
liquid
State Under Standard Conditions
---
Melting Point
---
Solidification Point
---
Solubility In Water
---
Properties Status
---
Vapor Pressure
approx. 93 hPa
Auto Ignition Temperature
> 200 °C
Colour Intensity
---
Dynamic Viscosity
---
Flash Point
approx. 19 °C
Voc Content
100 Wt %
Odor Threshold
---
Lower Explosive Limit
0,8 Vol-%
Relative Evaporation Rate
---
Explosive Limits
---
Flammability
---
Solubility
---
Boiling Point
> 116 °C
Upper Explosive Limit
8 Vol-%
Metal Corrosion
---
Cloud Point
---
Form
---
Colour
transparent colourless
Relative Density
---
Density
0,8 - 0,9 g/cm³
Softening Point
---
Freezing Point
---
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

No information available.

Hazardous reactions

No information available.

Avoid

No hazardous reaction when handled and stored according to provisions.

Incompatible

Acid, concentrated. Oxidising agent, strong. Alkali (lye), concentrated.

Decomposition

Does not decompose when used for intended uses. Thermal decomposition can lead to the escape of irritating gases and vapours. Carbon dioxide (CO2) Nitrogen oxides (NOx) Carbon monoxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the industry and process. Consult the appropriate local waste disposal expert about waste disposal.

Waste Codes

07 03 04 Waste code product EWC/AVV
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
FLAMMABLE LIQUID, N.O.S. (XYLENE · METHYL ISOBUTYL KETONE)
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for VERDÜNNUNG?

The signal word is danger.

What is the physical form of VERDÜNNUNG?

VERDÜNNUNG is a liquid appearing as transparent colourless with transparent colourless color. It has characteristic like: solvent odor.

What is VERDÜNNUNG used for?

Solvent Industrial uses: Uses of substances as such or in preparations at industrial sites Professional uses: Public domain (administration, education, entertainment, services, craftsmen)

What are the hazard statements for VERDÜNNUNG?

This substance has 7 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H332: Harmful if inhaled.
  • H335: May cause respiratory irritation.
  • H373: May cause damage to organs through prolonged or repeated exposure.