097 Spezial-Verdünning

Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Remove contaminated, saturated clothing immediately. After contact with skin, wash immediately with plenty of water and soap. Do not wash with: Solvents/Thinner

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.

alcohol resistant foam, Carbon dioxide (CO2), Water mist, Extinguishing powder

Full water jet

Burning produces heavy smoke. Do not inhale explosion and combustion gases.

Use water spray jet to protect personnel and to cool endangered containers.

Clear spills immediately.

Do not allow to enter into surface water or drains.

Clean with detergents. Avoid solvent cleaners.

All work processes must always be designed so that the following is excluded: Inhalation of vapours or spray/mists Inhalation of dust/particles Skin contact Eye contact Never use pressure to empty container. Wear personal protection equipment (refer to section 8).

Keep/Store only in original container.

Comply with the health and safety at work laws.

Vapours are heavier than air, spread along floors and form explosive mixtures with air. Vapours can form explosive mixtures with air. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Use only antistatically equipped (spark-free) tools. Provide earthing of containers, equipment, pumps and ventilation facilities. Wear anti-static footwear and clothing Electrical equipment should be protected to the appropriate standard.

Provide adequate ventilation. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.

Suitable material : FKM (fluoro rubber) Required properties : liquid-tight. Breakthrough time : > 60 min See information supplied by the manufacturer. Thickness of the glove material : 0,7mm Recommended glove articles : When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Additional hand protection measures : Check leak tightness/impermeability prior to use. Do not wear gloves near rotary machines and tools. Take recovery periods for skin regeneration. In the case of wanting to use the gloves again, clean them before taking off and air them well. Remark : For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.

Suitable eye protection Eye glasses with side protection

Respiratory protection necessary at: exceeding exposure limit values Suitable respiratory protection apparatus Filtering device (full mask or mouthpiece) with filter: A

Body protection Required properties : antistatic. Recommended material : Natural fibres (e.g. cotton) heat-resistant synthetic fibres

Do not allow to enter into surface water or drains.

Stable under recommended storage and handling conditions (See section 7).

No information available.

Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.

When exposed to high temperatures

oxidizing agents, strongly alkaline and strongly acid materials

carbon monoxide and dioxide, smoke, oxides of nitrogen