NextSDS Logo
Safety Data Sheet EN

EP Curing Agent (EX-920)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
EP Curing Agent (EX-920)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hardener Industrial uses: Uses of substances as such or in preparations at industrial sites Professional uses: Public domain (administration, education, entertainment, services, craftsmen)

Uses advised against

Do not use for private purposes (household).

Manufacturers & Suppliers

G

Geholit + Wiemer Lack- und Kunststoff-Chemie GmbH

manufacturer

Sofienstraße 36, 76676 Graben-Neudorf

+49 (0) 7255 / 99 0

Emergency Contacts

Emergency Contact

+49 (0) 7255 / 99 299

Mo - Thu 7.00 - 17.00 Uhr Fr 7.00 - 15.30 Uhr Only available during office hours.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318
Skin Irrit. Cat. 2 H315
Flam. Liq. Cat. 3 H226
STOT SE Cat. 3 H335
STOT RE Cat. 2 H373

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P310 Immediately call a POISON CENTER/doctor/...
P321 Specific treatment (see ... on this label).
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
XYLENE EC: 215-535-7 1330-20-7 20 - 25% Yes
BUTAN-1-OL EC: 200-751-6 71-36-3 5 - 10% Yes
ETHYLENEDIAMINE EC: 203-468-6 107-15-3 0.1 - 0.5% Yes

Full text of H- and EUH-phrases: see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician. Provide fresh air.

Symptoms: Asthmatic complaints, Respiratory complaints, Dizziness, Headache

Skin contact

Wash immediately with: Water and soap. Do not wash with: Solvents/Thinner. In case of skin irritation, consult a physician.

Symptoms: Allergic reactions

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.

Ingestion

Do NOT induce vomiting. Rinse mouth thoroughly with water. Let water be drunken in little sips (dilution effect).

Immediate Medical Attention

In case of allergic symptoms, especially in the breathing area, seek medical advice immediately. In case of accident or unwellness, seek medical advice immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

alcohol resistant foam, ABC-powder, Extinguishing blanket

Specific hazards

Burning produces heavy smoke.

Instructions

Do not inhale explosion and combustion gases.

Firefighter Protection

Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection equipment. Remove all sources of ignition. Provide adequate ventilation.

Environmental

Ensure waste is collected and contained.

Cleanup methods

Absorb with liquid-binding material

Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

It is recommended to design all work processes always so that the following is excluded: Inhalation of vapours or spray/mists Skin contact Eye contact Only use the material in places where open light, fire and other flammable sources can be kept away. Handle and open container with care. When using do not eat, drink, smoke, sniff.

Storage

Keep only in the original container in a cool, well-ventilated place. Keep container tightly closed. Floors should be impervious, resistant to liquids and easy to clean. Ensure adequate ventilation of the storage area. Restrict access to stockrooms. Protect against Heat. UV-radiation/sunlight.

Hygiene

When using do not eat, drink, smoke, sniff.

Fire prevention

Keep away from sources of ignition - No smoking. Vapours are heavier than air, spread along floors and form explosive mixtures with air. Take precautionary measures against static discharges. Provide earthing of containers, equipment, pumps and ventilation facilities.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.

Hands

Use protective gloves in accordance with EN 374. Please observe the intended use instructions and permeation times of the glove manufacturer! Full contact gloves should offer permeation times over 120 minutes. Gloves with shorter permeation times are only suitable for short term contact. Contaminated gloves should be disposed of immediately, splattered gloves should be disposed of after the maximum wear time has been reached, at the latest at the end of the work shift. Suitable material for work with short term contact: nitrile-based rubber, e.g. Camatril made by KCL, or comparable products. Material thickness > 0,4mm. Permeation time > 30 minutes. Suitable material for work with short term contact: butyl-based rubber, e.g. Butoject made by KCL, or comparable products. Material thickness > 0,7mm. Permeation time > 30 minutes.

Eyes

Eye glasses with side protection DIN EN 166

Respiratory

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Respiratory protection necessary at: exceeding exposure limit values. Suitable respiratory protection apparatus: Combination filtering device (EN 14387)

Skin/Body

Required properties antistatic. Recommended material Natural fibres (e.g. cotton)

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Form
---
Relative Density
---
Decomposition Temperature
---
Upper Explosive Limit
12 Vol-%
Lower Explosive Limit
0,8 Vol-%
Freezing Point
---
Physical State
liquid
Voc Content
33,25 Wt %
Odor
like: Amines
Solubility In Water
---
Crystallisation Point
---
Flammability
---
Relative Evaporation Rate
---
Molecular Weight
---
Solidification Point
---
Ph
---
Flash Point
approx. 24 °C
Boiling Point
> 120 °C
Properties Status
---
Auto Ignition Temperature
> 200 °C
Solubility In Fat
---
Appearance
transparent
Evaporation Rate
---
Vapor Density
---
Dynamic Viscosity
---
Solubility
---
Kinematic Viscosity
---
Bulk Density
---
Partition Coefficient
---
Metal Corrosion
---
State Under Standard Conditions
---
Melting Point
---
Vapor Pressure
approx. 44 hPa
Softening Point
---
Cloud Point
---
Colour Intensity
---
Odor Threshold
---
Physical State Data
liquid
Colour
transparent
Density
0,9 - 1 g/cm³
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

No information available.

Hazardous reactions

No information available.

Avoid

No hazardous reaction when handled and stored according to provisions.

Incompatible

Acid, concentrated. Oxidising agent, strong. Alkali (lye), concentrated.

Decomposition

Does not decompose when used for intended uses. Thermal decomposition can lead to the escape of irritating gases and vapours. Carbon dioxide (CO2) Nitrogen oxides (NOx) Carbon monoxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the industry and process. Consult the appropriate local waste disposal expert about waste disposal.

Disposal

Following consultation with waste management company and after solidification, landfill together with household waste.

Waste Codes

08 01 11 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1866
Shipping Name
RESIN SOLUTION
Transport Class
3
Packing Group
III
ADR

Transport in containers with max. 450 litres contents are not subject to the regulations of ADR/RID.

IMDG

LQ 5 I · E 1 · IMDG 2.3.2.5 (<= 30 l)

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for EP Curing Agent (EX-920)?

The signal word is danger.

What is the physical form of EP Curing Agent (EX-920)?

EP Curing Agent (EX-920) is a liquid appearing as transparent with transparent color. It has like: amines odor.

What is EP Curing Agent (EX-920) used for?

Hardener Industrial uses: Uses of substances as such or in preparations at industrial sites Professional uses: Public domain (administration, education, entertainment, services, craftsmen)

What are the hazard statements for EP Curing Agent (EX-920)?

This substance has 5 hazard statements:

  • H226: Flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H335: May cause respiratory irritation.
  • H373: May cause damage to organs through prolonged or repeated exposure.