2C-EP Primer, quick curing

Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician. Provide fresh air.

Symptoms: Respiratory complaints

Wash immediately with: Water and soap Do not wash with: Solvents/Thinner In case of skin irritation, consult a physician.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.

Do NOT induce vomiting. Rinse mouth thoroughly with water. Let water be drunken in little sips (dilution effect).

alcohol resistant foam, ABC-powder, Extinguishing blanket

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)

Use water spray jet to protect personnel and to cool endangered containers.

Use personal protection equipment. Remove all sources of ignition. Provide adequate ventilation.

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Ensure waste is collected and contained.

Absorb with liquid-binding material. Ventilate affected area.

Materials: sand, diatomaceous earth, acid- or universal binding agents

Persons with a history of skin sensitisation problems should not be employed in any process in which this product is used. It is recommended to design all work processes to exclude inhalation of vapours or spray/mists, skin contact, and eye contact. Handle and open container with care. When using do not eat, drink, smoke, sniff.

Keep only in the original container in a cool, well-ventilated place. Keep container tightly closed. Protect against Heat. UV-radiation/sunlight.

When using do not eat, drink, smoke, sniff.

Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. Provide earthing of containers, equipment, pumps and ventilation facilities.

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.

Work must be executed in such a way that no or only short term exposure to skin may occur. Use protective gloves in accordance with EN 374. Please observe the intended use instructions and permeation times of the glove manufacturer! Suitable material for work with short term contact: nitrile-based rubber, e.g. Camatril made by KCL, or comparable products. Material thickness > 0,4mm. Permeation time > 60 minutes. Suitable material for work with long, intensive, or multiple contact: fluorocarbon rubber, e.g. Viton made by KCL or comparable products. Material thickness > 0,7mm. Permeation time > 480 minutes.

Eye glasses with side protection DIN EN 166

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Respiratory protection necessary at: exceeding exposure limit values. Combination filtering device (EN 14387)

Required properties antistatic. Recommended material Natural fibres (e.g. cotton)

The product is stable under storage at normal ambient temperatures.

No information available.

No information available.

No hazardous reaction when handled and stored according to provisions.

Acid, concentrated. Oxidising agent, strong. Alkali (lye), concentrated.

Does not decompose when used for intended uses. Thermal decomposition can lead to the escape of irritating gases and vapours. Carbon dioxide (CO2) Nitrogen oxides (NOx) Carbon monoxide

The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the industry and process. Consult the appropriate local waste disposal expert about waste disposal.

Following consultation with waste management company and after solidification, landfill together with household waste.