Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MR® 68 C Penetrant
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Testing material for nondestructive surface crack detection
Manufacturers & Suppliers
MR® Chemie GmbH
manufacturer
Nordstr. 61-63, 59427 Unna (Germany)
+49 (0)2303 95151 0
http://www.mr-chemie.de
Emergency Contacts
Chemical Emergency, Spill, Leak, Fire, Exposure or Accident (USA and Canada)
1 800 424 9300
24h
Chemical Emergency, Spill, Leak, Fire, Exposure or Accident (Outside USA and Canada)
001 703 527 3887
24h
WISAG FMO Cargo Service GmbH & CO.KG
0800-181-7059
24h
WISAG FMO Cargo Service GmbH & CO.KG
4001 204937
24h
ZH
WISAG FMO Cargo Service GmbH & CO.KG
800 968 793
24h
ZH
WISAG FMO Cargo Service GmbH & CO.KG
000 800 100 7141
24h
HI
WISAG FMO Cargo Service GmbH & CO.KG
0 800 983 611
24h
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butane EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| Distillates (petroleum), hydrotreated light EC: 265-149-8 | 64742-47-8 | 10 - 25% | Yes |
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 10 - 25% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| 2,2',2''-nitrilotriethanol EC: 203-049-8 | 102-71-6 | 5 - 10% | No |
| 3',6'-Bis(diethylamino)spiro(isobenzofuran-1(3H),9'-(9H)xanthen)-3-on EC: 208-096-8 | 509-34-2 | 1 - 5% | Yes |
Propellant: Propane-Butane
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Not relevant - aerosol can.
Medical Treatment
Grease with skin-cream to restore fat film in order to prevent skin inflammation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
In case of fire, the following can be released: Carbon monoxide (CO)
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to item 13.
Related Products
Similar products with comparable safety profiles
MR® 68 NF Penetrant
---
MR® 79 Special Cleaner
---
FLAW DETECTOR PENETRANT 2
---
MR® 76 FA Magnetic powder suspension (Aerosol)
---
MR® 72 AF Contrast paint white (Aerosol)
---
CRC® Penetrating Oil, 311 g
---
MR® 76 S Magnetic powder suspension, black, ready for use, Version A Aerosol
---
FLAWFINDER DYE PENETRANT SPRAY
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Store in a cool location. Observe official regulations on storing packagings with pressurised containers. Protect from heat and direct sunlight.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
For good ventilation provide, this can be achieved by local or space exhaust.
Butyl rubber, BR. Recommended thickness of the material: ≥ 0.5mm. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Value for the permeation: Level ≤ 4.
Safety glasses
Filter AX. If the concentration lies over the job limit values, then, a certified respirator suitable for this purpose must be used.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Thermal decomposition / conditions to be avoided: Danger of bursting of the aerosol can during overheating
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Eliminate in accordance with local regulations.
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Eliminate in accordance with local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MR® 68 C Penetrant?
The signal word is danger.
What is the physical form of MR® 68 C Penetrant?
MR® 68 C Penetrant is a aerosol with red color. It has characteristic odor.
What is MR® 68 C Penetrant used for?
Testing material for nondestructive surface crack detection
What are the hazard statements for MR® 68 C Penetrant?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
What is the melting point of MR® 68 C Penetrant?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..