Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP PTFE SPRAY 500 ML
- Product Code
- 090203
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) Product category: Other coatings and paints Process category: PROC7 Industrial spraying PROC11 Non industrial spraying Application of the substance / the mixture: Lubricant
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
European Aerosols B.V.
manufacturer
Wolfraamweg 2 NL-8471 XC Wolvega The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
NPIS National Poisons Information Centre
+44 0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates(petroleum), hydrotreated lightparaffinic EC: 265-158-7 | 64742-55-8 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 918-481-9 | --- | 10 - 12.5% | Yes |
| butane(containing < 0,1 % butadiene(203-450-8)) EC: 203-448-7 | 106-97-8 | 10 - 12.5% | Yes |
| pentane EC: 203-692-4 | 109-66-0 | 10 - 12.5% | Yes |
| isobutane(containing < 0,1 % butadiene(203-450-8)) EC: 200-857-2 | 75-28-5 | 10 - 12.5% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Not required.
Not required.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1 Gases.
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP PTFE SPRAY 500 ML?
The signal word is danger.
What is the physical form of MOTIP PTFE SPRAY 500 ML?
MOTIP PTFE SPRAY 500 ML is a aerosol appearing as light brown with light brown color. It has solvent-like odor.
What is the solubility of MOTIP PTFE SPRAY 500 ML?
Not miscible or difficult to mix.
What is MOTIP PTFE SPRAY 500 ML used for?
SU21 Consumer uses: Private households / general public / consumers SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) Product category: Other coatings and paints Process category: PROC7 Industrial spraying PROC11 Non industrial spraying Application of the substance / the mixture: Lubricant
What are the hazard statements for MOTIP PTFE SPRAY 500 ML?
This substance has 2 hazard statements:
- H412: Harmful to aquatic life with long lasting effects.
- Extremely flammable aerosol. Pressurised container: May burst if heated.
What is the melting point of MOTIP PTFE SPRAY 500 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..