Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PTFE Spray
- Product Code
- 119705
- Synonyms
- Transparent - 400 mL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Consumer use Professional use Cleaning agent Detergent
Manufacturers & Suppliers
Soudal Pty Ltd
national supplier
75 Owen St Glendenning NSW 2761 Australia
1300 507 011
Emergency Contacts
Emergency Contact
1300 507 011
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. For gross contamination, immediately drench with water and remove clothing. Continue to flush skin and hair with plenty of water (and soap if material is insoluble). For skin burns, cover with a clean, dry dressing until medical help is available. If blistering occurs, do NOT break blisters.
Symptoms: swelling, redness, blistering or irritation
If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice.
Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.
Immediate Medical Attention
Seek medical advice if effects persist (inhalation), if swelling, redness, blistering or irritation occurs (skin), or in all cases of eye contamination.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
If material is involved in a fire use water fog (or if unavailable fine water spray), alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder).
Extremely flammable aerosol. May form flammable vapour mixtures with air. Flameproof equipment necessary in area where this chemical is being used. Nearby equipment must be earthed. Electrical requirements for work area should be assessed according to AS3000. Vapour may travel a considerable distance to source of ignition and flash back. Avoid all ignition sources. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing switches and electrical equipment etc) must be eliminated both in and near the work area. Do NOT smoke.
Heating can cause expansion or decomposition leading to violent rupture of containers. If safe to do so, remove containers from path of fire. Keep containers cool with water spray.
Firefighter Protection
Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of combustion or decomposition.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Small spills: Wipe up with absorbent. Large spills: Shut off ignition sources, clear area, contain, clean up.
Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours or dust. Wipe up with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.
If safe to do so, shut off all possible sources of ignition. Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contamination and the inhalation of vapours. Work up wind or increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert material). Use a spark-free shovel. Collect and seal in properly labelled containers or drums for disposal. If contamination of crops, sewers or waterways has occurred advise local emergency services.
Contain - prevent run off into drains and waterways.
Wipe up with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.
Materials: absorbent (clean rag or paper towels), soil, sand or other inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of vapour, mist or aerosols.
Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition. Do not expose to temperatures exceeding 50 °C/122 °F. Keep container standing upright. Keep containers closed when not in use - check regularly for leaks.
Store away from sources of heat and/or ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This material is thermally stable when stored and used as directed.
No known hazardous reactions.
Elevated temperatures and sources of ignition.
Oxidising agents.
Oxides of carbon and nitrogen, smoke and other toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The material is classified as not hazardous for acute or chronic aquatic exposure based on an acute toxicity estimate of > 100 mg/L.
12.2 Persistence and degradability
No information available.
12.3 Bioaccumulative potential
No information available.
12.4 Mobility in soil
No information available.
12.5 Results of PBT and vPvB assessment
No information available.
12.6 Endocrine disrupting properties
No information available.
12.7 Other adverse effects
No information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
If possible material and its container should be recycled. If material or container cannot be recycled, dispose in accordance with local, regional, national and international Regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is PTFE Spray known by?
PTFE Spray is also known as: Transparent - 400 mL
What is the hazard signal word for PTFE Spray?
The signal word is danger.
What is the physical form of PTFE Spray?
PTFE Spray is a liquid with variable in colour, depending on the composition color. It has characteristic odor.
What is PTFE Spray used for?
Consumer use Professional use Cleaning agent Detergent
What are the hazard statements for PTFE Spray?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: may burst if heated.
What is the melting point of PTFE Spray?
The melting point is N Av and the boiling point is N Av.