Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECTANE PTFE SPRAY
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
SIROFLEX LIMITED
manufacturer
Dodworth Business Park, Dodworth, Barnsley, South Yorkshire S75 3SP
01226 771600
http://www.siroflex.co.uk
Emergency Contacts
Emergency Contact
01226 771600
Office Hours Only
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C7, n-alkanes, isoalkanes, cycloalkanes EC: 927-510-4 | --- | 2.5 - 10% | Yes |
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cycloalkanes, < 5 % n-hexane EC: 921-024-6 | --- | 2.5 - 10% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 2.5 - 10% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 25 - 50% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. Take affected persons into fresh air and keep quiet.
Immediately wash with water and soap and rinse thoroughly. Immediately remove any clothing soiled by the product.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Do not induce vomiting; call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Fire-extinguishing powder, Carbon dioxide
Water with full jet
Can form explosive gas-air mixtures.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 °C.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Material of gloves: Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.45 mm. Penetration time of glove material: ≥ 240 min. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Filter AX
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
Aldehyde, Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
Ecotoxical effects
The substance is classified as harmful to fish and aquatic organisms.
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TECTANE PTFE SPRAY?
The signal word is danger.
What is the physical form of TECTANE PTFE SPRAY?
TECTANE PTFE SPRAY is a aerosol with whitish color. It has petrol-like odor.
What is TECTANE PTFE SPRAY used for?
Lubricant
What are the hazard statements for TECTANE PTFE SPRAY?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of TECTANE PTFE SPRAY?
The melting point is Undetermined. and the boiling point is Undetermined..