NextSDS Logo
Safety Data Sheet EN

SIGMACOVER 295 BASE REDBROWN

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SIGMACOVER 295 BASE REDBROWN
Product Form
Liquid
Product Code
00249255

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Professional applications, Used by spraying, Coating.

Uses advised against

Not applicable.

Manufacturers & Suppliers

P

PPG Architectural Coatings Canada, Inc.

manufacturer

1550, rue Ampère, bureau 500, Boucherville (Québec) J4B 7L4, Canada

+1 450-655-3121

P

PPG Industries, Inc.

manufacturer

One PPG Place, Pittsburgh, PA 15272

888-977-4762

Emergency Contacts

Emergency Contact

(412) 434-4515

Emergency Contact

(514) 645-1320

SETIQ Interior de la República

800-00-214-00

SETIQ Ciudad de México

(55) 5559-1588

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1B
Carc. Cat. 1A
Repr. Cat. 2
STOT SE Cat. 3
STOT RE Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H314 Causes digestive tract burns.
H315 Causes skin irritation.
H316 Prolonged or repeated contact may dry skin and cause irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H350 May cause cancer.
H361 Suspected of damaging fertility or the unborn child.
H372 May cause damage to organs through prolonged or repeated exposure. (hearing organs)

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P261 Do not breathe vapor.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, protective clothing and eye or face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 If exposed or concerned: Get medical advice or attention.
P312 Call a POISON CENTER or doctor if you feel unwell.
P333 + P313 If skin irritation or rash occurs: Get medical advice or attention.
P337 + P313 If eye irritation persists: Get medical advice or attention.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
zinc oxide 1314-13-2 10 - 30% No
Epoxy Resin (700<MW<=1100) 25036-25-3 10 - 30% No
xylene 1330-20-7 10 - 30% No
crystalline silica, respirable powder (>10 microns) 14808-60-7 5 - 10% No
Talc , not containing asbestiform fibres 14807-96-6 3 - 7% No
diiron trioxide 1309-37-1 3 - 7% No
aluminium powder (stabilised) 7429-90-5 1 - 5% No
1-methoxy-2-propanol 107-98-2 1 - 5% No
ethylbenzene 100-41-4 1 - 5% No
Benzene 64742-48-9 1 - 5% No
Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics 84852-15-3 1 - 5% No
4-nonylphenol, branched 14808-60-7 1 - 5% No
crystalline silica, respirable powder (<10 microns) 108-88-3 0.1 - 1% No
toluene 108-88-3 0.1 - 1% No

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Notes

Ranges if listed above for hazardous ingredient(s) are prescribed ranges. The actual concentration(s) or actual concentration range(s) are being withheld as a trade secret.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.

Symptoms: May cause respiratory irritation. Adverse symptoms may include the following: respiratory tract irritation, coughing, reduced fetal weight, increase in fetal deaths, skeletal malformations.

Skin contact

Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.

Symptoms: Causes skin irritation. Defatting to the skin. May cause an allergic skin reaction. Adverse symptoms may include the following: irritation, redness, dryness, cracking, reduced fetal weight, increase in fetal deaths, skeletal malformations.

Eye contact

Remove contact lenses, irrigate copiously with clean, fresh water, holding the eyelids apart for at least 10 minutes and seek immediate medical advice.

Symptoms: Causes serious eye irritation. Adverse symptoms may include the following: pain or irritation, watering, redness.

Ingestion

If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do NOT induce vomiting.

Symptoms: Corrosive to the digestive tract. Causes burns. Adverse symptoms may include the following: stomach pains, reduced fetal weight, increase in fetal deaths, skeletal malformations.

Immediate Medical Attention

Contact a POISON CONTROL CENTER, EMERGENCY ROOM OR PHYSICIAN immediately. In case of inhalation of decomposition products in a fire, symptoms may be delayed.

Medical Treatment

No specific treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide adequate ventilation.

Small spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment. Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Avoid exposure - obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Take precautionary measures against electrostatic discharges. Empty containers retain product residue and can be hazardous. Do not reuse container.

Storage

Store between 0 to 35°C (32 to 95°F). Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Store locked up. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use.

Hygiene

Wash hands thoroughly after handling. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

Fire prevention

Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Take precautionary measures against electrostatic discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Brownish-red.
Colour Intensity
---
Form
---
Odor
Characteristic.
Odor Threshold
---
Ph
Not applicable.
Melting Point
Not available.
Boiling Point
>37.78°C (>100°F)
Flash Point
Closed cup: 29°C (84.2°F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
1.67
Bulk Density
---
Density
13.94
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
Not applicable.
Solubility In Water
Not soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Dynamic (room temperature): Not available.
Kinematic Viscosity
Kinematic (40°C (104°F)): >21 mm²/s (>21 cSt)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

| Product/ingredient name | Result | Species | | --- | --- | --- | | zinc oxide | Acute - EC50 - Fresh water OECD Age: <24 hours 0.481 mg/l [48 hours] Effect: Intoxication Acute - EC50 0.17 mg/l [72 hours] Chronic - NOEC - Fresh water 0.017 mg/l [72 hours] | Daphnia - Water flea - Daphnia magna - Neonate Algae Algae |

12.1 Toxicity

diiron trioxide | Acute - EC50 OECD 202 >100 mg/l [48 hours] | Daphnia

12.1 Toxicity

1-methoxy-2-propanol | Acute - LC50 - Fresh water >4500 mg/l [96 hours] | Fish - Goldfish

12.2 Persistence and degradability

Not available.

12.3 Bioaccumulative potential

Not available.

12.4 Mobility in soil

Not available.

12.5 Results of PBT and vPvB assessment

Not available.

12.6 Endocrine disrupting properties

Not available.

12.7 Other adverse effects

Not available.

12.1 Toxicity

Product/ingredient name: ethylbenzene Result: Acute - LC50 23300 mg/l [48 hours], Acute - EC50 - Fresh water 1.8 mg/l [48 hours], Chronic - NOEC - Fresh water 1 mg/l Species: Daphnia - Daphnia, Daphnia

12.1 Toxicity

Product/ingredient name: 4-nonylphenol, branched. Result: Acute - LC50 0.221 mg/l [96 hours] (Fish). Acute - EC50 OECD 0.044 mg/l [48 hours] Effect: Intoxication (Daphnia - Ceriodaphnia dubia / Crustaceans - Water flea - Moina macrocopa). Acute - EC50 OECD 0.04 mg/l [72 hours] Effect: Population (Algae - Green algae - Raphidocelis subcapitata).

12.2 Persistence and degradability

ethylbenzene 79% [10 days] - Readily

12.3 Bioaccumulative potential

Product/ingredient name: xylene, LogP_ow: 3.12, BCF: 7.4 to 18.5, Potential: Low

12.3 Bioaccumulative potential

1-methoxy-2-propanol | <1 | - | Low

12.3 Bioaccumulative potential

Product/ingredient name: ethylbenzene, LogP_ow: 3.6, BCF: 79.43, Potential: Low

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

Product/ingredient name: 4-nonylphenol, branched; LogP_ow: 5.4; BCF: 251.19; Potential: Low

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.3 Bioaccumulative potential

| Product/ingredient name | LogP_{ow} | BCF | Potential | | --- | --- | --- | --- | | toluene | 2.73 | 8.32 | Low |

Mobility in soil

Soil/Water partition coefficient: Not available.

Not available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1263
Shipping Name
PAINT
Transport Class
3
Packing Group
III
IMDG

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IATA

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SIGMACOVER 295 BASE REDBROWN?

The signal word is danger.

What is the physical form of SIGMACOVER 295 BASE REDBROWN?

SIGMACOVER 295 BASE REDBROWN is a liquid. with brownish-red. color. It has characteristic. odor.

What is SIGMACOVER 295 BASE REDBROWN used for?

Professional applications, Used by spraying, Coating.

What are the hazard statements for SIGMACOVER 295 BASE REDBROWN?

This substance has 10 hazard statements:

  • H226: Flammable liquid and vapor.
  • H314: Causes digestive tract burns.
  • H315: Causes skin irritation.
  • H316: Prolonged or repeated contact may dry skin and cause irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H350: May cause cancer.
  • H361: Suspected of damaging fertility or the unborn child.
  • H372: May cause damage to organs through prolonged or repeated exposure. (hearing organs)

What is the melting point of SIGMACOVER 295 BASE REDBROWN?

The melting point is Not available. and the boiling point is >37.78°C (>100°F).