Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARDECA MATIC + III
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Professional use, Consumer use, Non-dispersive use, Used in closed systems, Lubricants and additives
Uses advised against
No additional information available
Manufacturers & Suppliers
VROMAN nv
manufacturer
Oudenaardestraat 49 8570 Vichte - Belgium
0032 (0) 56 72 62 29
Emergency Contacts
Emergency Contact
0032 (0) 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| LUBRICATING OILS (PETROLEUM) C15 - 100% 30, hydrotreated neutral oil-based; Baseoil - unspecified EC: 276-737-9 | 72623-86-0 | 10 - 25% | Yes |
| Baseoil - unspecified EC: 265-158-7 | 64742-55-8 | 10 - 25% | Yes |
| Bis(nonylphenyl)amine EC: 253-249-4 | --- | 0.5 - 1.5% | Yes |
| Reaction product of: polyethylenepolyamine-(C16-C18)-alkylamides with monothio-(C2)-alkyl-phosphonates EC: 417-450-2 | --- | 0.5 - 1.5% | Yes |
| oxydipropyl dibenzoate EC: 248-258-5 | --- | 0.1 - 0.25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Not expected to require first aid measures.
Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.
Wash skin with mild soap and water.
Symptoms: Not expected to present a significant skin hazard under anticipated conditions of normal use.
In case of eye contact, immediately rinse with clean water for 10-15 minutes.
Symptoms: Not expected to present a significant eye contact hazard under anticipated conditions of normal use.
Do not induce vomiting. Rinse mouth. Get immediate medical advice/attention.
Symptoms: Not expected to present a significant ingestion hazard under anticipated conditions of normal use.
Immediate Medical Attention
Get immediate medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Powder. Dry chemical product.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Impound and recover large spill by mixing it with inert granular solids.
Prevent entry to sewers and public waters.
Detergent. Take up liquid spill into absorbent material sand, saw dust, kieselguhr.
Materials: Detergent, absorbent material, sand, saw dust, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid all unnecessary exposure. Both local exhaust and general room ventilation are usually required.
Store in dry, cool, well-ventilated area.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Permeation time: minimum >480min long term exposure; material / thickness [mm]: >0,35 mm. Nitrile rubber (NBR)
Safety glasses.
No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation.
No special clothing/skin protection equipment is recommended under normal conditions of use
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None under normal conditions.
None under normal conditions.
No data available.
Strong oxidizers. acids. Bases.
None under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARDECA MATIC + III?
The signal word is warning.
What is the physical form of ARDECA MATIC + III?
ARDECA MATIC + III is a liquid appearing as oily liquid. with red. color. It has characteristic. odor.
What is the solubility of ARDECA MATIC + III?
Slightly soluble, the product remains on the water surface.
What is ARDECA MATIC + III used for?
Industrial use, Professional use, Consumer use, Non-dispersive use, Used in closed systems, Lubricants and additives
What are the hazard statements for ARDECA MATIC + III?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction
What is the melting point of ARDECA MATIC + III?
The melting point is No data available and the boiling point is No data available.