Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARDECA AGRITRAC EXTRA 10W40
- Product Form
- Mixture
- Product Code
- P61011
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Engine oil Lubricants and additives
Uses advised against
No additional information available
Manufacturers & Suppliers
ARDECA NV
manufacturer
Oudenaardestraat 49, B-8570 Vichte, Belgium
+32 56 72 62 29
http://www.ardeca.be
Emergency Contacts
Belgian Anti-Poison Centre
+32 70 245 245
National Poisons Information Service (Cardiff Centre) University Hospital Llandough
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Highly refined mineral oils and additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic (Note L) EC: 265-157-1 | 64742-54-7 | 25 - 50% | Yes |
| Blend of mineral oils * (*)(Note L) | --- | 10 - 20% | Yes |
| zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate) EC: 224-235-5 | 4259-15-8 | 1 - 2.5% | Yes |
| Calcium branched alkyl phenate sulphide (overbased) | --- | 0.3 - 2.5% | Yes |
| 2-tetradecyloxirane, reaction products with boric acid EC: 701-392-2 | --- | 0.1 - 1% | Yes |
Notes
The highly refined mineral oil contains <3% (w/w) DMSO extract, according to IP346.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water.
Rinse eyes with water as a precaution.
Call a poison center or a doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Do not use a heavy water stream.
Combustible liquid.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation in process area to prevent formation of vapour.
Keep container closed when not in use. Keep in a cool, well-ventilated place away from heat.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Type: Reusable gloves, Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness: ≥0.35 mm, Standard: EN ISO 374
Safety glasses. Type: Safety glasses, Field of application: Droplet, Characteristics: clear, Standard: EN 166
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use. Reacts violently with (strong) oxidizers.
None under recommended storage and handling conditions (see section 7).
No additional information available
No decomposition if stored normally.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment.
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Dispose in a safe manner in accordance with local/national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARDECA AGRITRAC EXTRA 10W40?
The signal word is no signal word.
What is the physical form of ARDECA AGRITRAC EXTRA 10W40?
ARDECA AGRITRAC EXTRA 10W40 is a liquid with brown. color. It has characteristic. odor.
What is the solubility of ARDECA AGRITRAC EXTRA 10W40?
Water: Insoluble / Slightly miscible
What is ARDECA AGRITRAC EXTRA 10W40 used for?
Engine oil Lubricants and additives
What is the melting point of ARDECA AGRITRAC EXTRA 10W40?
The melting point is Not applicable and the boiling point is Not available.