Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARDECA HYDRO ZF46
- Product Code
- ARD045046
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); PC17 Hydraulic fluids; PROC8a Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities; PROC8b Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities; PROC20 Heat and pressure transfer fluids in dispersive, professional use but closed systems; ERC9a Wide dispersive indoor use of substances in closed systems; ERC9b Wide dispersive outdoor use of substances in closed systems; Hydraulic fluid
Manufacturers & Suppliers
VROMAN NV
manufacturer
Oudenaardestraat 49, 8570 Vichte, BELGIUM
+32 (0)56 72 62 29
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
For the wording of the listed risk phrases refer to section 16.
Notes
Dangerous components: Void
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
If swallowed or in case of vomiting, danger of entering the lungs.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, dry chemical, or foam. Water can be used to cool and protect exposed material.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective clothing.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Remove from the water surface (e.g. skim or suck off).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required. Avoid the formation of oil haze.
Store in cool, dry conditions in well sealed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Oil resistant gloves. Material of gloves: Nitrile rubber, NBR, PVC gloves, Neoprene gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling
Not required.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Reacts with strong oxidizing agents.
To avoid thermal decomposition do not overheat. No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Class Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARDECA HYDRO ZF46?
The signal word is no signal word.
What is the physical form of ARDECA HYDRO ZF46?
ARDECA HYDRO ZF46 is a liquid appearing as light brown with light brown color. It has characteristic odor.
What is ARDECA HYDRO ZF46 used for?
SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); PC17 Hydraulic fluids; PROC8a Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities; PROC8b Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities; PROC20 Heat and pressure transfer fluids in dispersive, professional use but closed systems; ERC9a Wide dispersive indoor use of substances in closed systems; ERC9b Wide dispersive outdoor use of substances in closed systems; Hydraulic fluid
What is the melting point of ARDECA HYDRO ZF46?
The melting point is Undetermined. and the boiling point is Undetermined..