NextSDS Logo
Safety Data Sheet EN

ANTI-FOG KIT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ANTI-FOG KIT
Product Code
B200 (PACF030) / B250 (PACF500)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Anti-fog Spray 30 ml + microfiber cloth / Anti-fog Spray 500 ml.

Manufacturers & Suppliers

Bollé Safety logo

Bollé Safety

manufacturer

34, rue de la soie 69100 VILLEURBANNE France.

00 33 (0)4 78 85 23 64

http://www.bolle-safety.fr

Emergency Contacts

UK - National Poisons Emergency

+44 870 600 6266

24h - health professionals only

Ireland - National Poisons Information Centre

+353 1 8379964

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H332
STOT SE Cat. 3 H336

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H318 Causes serious eye damage.
H332 Harmful if inhaled.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture consisting of the following components.

Chemical Name CAS Number Concentration Hazardous
1-methoxy-2-propanol EC: 203-539-1 107-98-2 25 - 50% Yes
docusate sodium EC: 209-406-4 577-11-7 5 - 10% Yes

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in the recovery position.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

If symptoms persist consult doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures appropriate to local circumstances and the environment.

Specific hazards

No further relevant information available.

Firefighter Protection

Mouth respiratory protective device. Wear fully protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons from danger area.

Environmental

Do not allow to enter sewers/ surface or ground water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Storage

No special requirements. Keep container tightly sealed.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Protective gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Eyes

Tightly sealed goggles (EN 166). Goggles recommended during refilling

Respiratory

In case of brief exposure use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Solidification Point
---
Voc Content
---
Auto Ignition Temperature
Not determined
Odor Threshold
Not determined
Crystallisation Point
---
Softening Point
---
Colour Intensity
---
Cloud Point
---
Properties Status
---
Partition Coefficient
Not determined
Bulk Density
---
Solubility In Water
Fully miscible
Ph
7
Vapor Pressure
Not determined
Flammability
Not determined.
Lower Explosive Limit
Not determined
Solubility In Fat
---
Decomposition Temperature
Not determined
Freezing Point
---
Evaporation Rate
Not determined
Density
Not determined
Form
Liquid
Boiling Point
100 °C
Odor
Odourless
Colour
Colourless
Vapor Density
Not determined
Kinematic Viscosity
Not determined
Dynamic Viscosity
Not determined
Explosive Limits
---
Relative Evaporation Rate
---
Metal Corrosion
---
Solubility
---
Melting Point
Not determined
Physical State
Liquid
Physical State Data
liquid
Relative Density
Not determined
Flash Point
70 °C
Molecular Weight
---
Upper Explosive Limit
Not determined
Appearance
Liquid.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used and stored according to specifications.

Reactivity

No data available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

Sulphur oxides (SOx)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal must be made according to official regulations.

Disposal

Disposal must be made according to official regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable.
Shipping Name
Not applicable.
Transport Class
Not applicable.
Packing Group
Not applicable.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

No further relevant information available.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ANTI-FOG KIT?

The signal word is danger.

What is the physical form of ANTI-FOG KIT?

ANTI-FOG KIT is a liquid appearing as liquid. with colourless color. It has odourless odor.

What is ANTI-FOG KIT used for?

Anti-fog Spray 30 ml + microfiber cloth / Anti-fog Spray 500 ml.

What are the hazard statements for ANTI-FOG KIT?

This substance has 3 hazard statements:

  • H318: Causes serious eye damage.
  • H332: Harmful if inhaled.
  • H336: May cause drowsiness or dizziness.

What is the melting point of ANTI-FOG KIT?

The melting point is Not determined and the boiling point is 100 °C.