ANTIFREEZE

Move injured person into fresh air and keep person calm under observation. If necessary, seek hospital and bring these instructions.

Symptoms: Irritation of nose, throat and airway.

Remove affected person from source of contamination. Remove contaminated clothing and flush with plenty of water until pain disappears. If discomfort persists transport to hospital and bring these instructions.

Symptoms: Prolonged skin contact may cause redness and irritation.

Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyes wide apart. Get medical attention if any discomfort continues.

Symptoms: Irritation, burning, lachrymation, blurred vision after liquid splash.

Immediately rinse mouth and drink plenty of water. Keep person under observation. If person becomes uncomfortable take to hospital along with these instructions.

Symptoms: May cause discomfort if swallowed. Ingestion may result in unconsciousness, blindness and death. Central nervous system depression.

Use fire-extinguishing media appropriate for surrounding materials.

Do not use water jet as an extinguisher, as this will spread the fire.

No unusual fire or explosion hazards noted.

No specific fire fighting procedure given.

In case of spills, beware of slippery floors and surfaces.

The product should not be dumped in nature but collected and delivered according to agreement with the local authorities.

Absorb spillage with non-combustible, absorbent material

Materials: non-combustible, absorbent material

Read and follow manufacturer's recommendations. Always remove grease with soap and water or skin cleaning agent, never use organic solvents. Good personal hygiene is necessary. Wash hands and contaminated areas with water and soap before leaving the work site. Do not eat, drink or smoke when using the product.

Store in tightly closed original container in a dry, cool and well-ventilated place.

Good personal hygiene is necessary. Wash hands and contaminated areas with water and soap before leaving the work site. Do not eat, drink or smoke when using the product.

Keep away from heat, sparks and open flame.

Use engineering controls to reduce air contamination to permissible exposure level. Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure limit is not exceeded.

Protective gloves and goggles must be used if there is a risk of direct contact or splash.

Wear tight-fitting goggles or face shield.

Wear suitable respiratory protection.

Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact. Wear apron or protective clothing in case of contact.

No particular stability concerns.

Reaction with: Oxidising materials.

Not determined.

Avoid excessive heat for prolonged periods of time. Avoid heat, flames and other sources of ignition.

Acids, oxidising.

In case of fire, toxic gases (CO, CO2, NOx) may be formed.