NextSDS Logo
Safety Data Sheet EN

Pieri Top 01

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Pieri Top 01

Regulatory Identifiers

CAS Number
N/A
UFI Code
0811-M0XH-K00D-V95P

Identified Uses

Construction Chemical.

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

GCP Produits de Construction SAS logo

GCP Produits de Construction SAS

manufacturer

ZA des Foulletons, 39140 Larnaud

+(33) 3 84 48 48 60

http://www.gcpat.com

Emergency Contacts

CHEMTREC

800-424-9300

CHEMTREC

+1 703-741-5970

CHEMTREC UK

+(44)-870-8200418

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H318 Causes serious eye damage.

Precautionary Statements

P280 Wear eye protection / face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

For further information, please refer to the product technical data sheet.

Chemical Name CAS Number Concentration Hazardous
Glycerol EC: 200-289-5 56-81-5 10 - 20% Yes
(+)-tartaric acid EC: 201-766-0 87-69-4 5 - 10% Yes
Titanium dioxide EC: 236-675-5 13463-67-7 1 - 3% Yes
Sodium 2-ethylhexyl sulphate 126-92-1 1 - 3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

No special measures required.

Skin contact

Wash with plenty of soap and water.

Eye contact

Rinse cautiously with water for several minutes.

Ingestion

Rinse mouth. Do NOT induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Carbon dioxide. Fire-extinguishing powder.

Specific hazards

No further relevant information available.

Firefighter Protection

Wear self-contained respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Wear protective equipment. Keep unprotected persons away.

Environmental

Inform respective authorities in case of seepage into water course or sewage system.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area.

Storage

Store in a well-ventilated place. Keep container tightly closed. Protect from frost. Store in a dry place. Keep cool.

Hygiene

Do not eat, drink or smoke when using this product.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

Protective gloves. EN 374. Material of gloves: Nitrile rubber. Nitrile rubber, NBR. Penetration time of glove material: The exact breakthrough time has to be determined by the manufacturer of the protective gloves and has to be observed.

Eyes

Safety glasses with side shield protection. EN 166.

Respiratory

Control exposure to ingredients with workplace control parameters if mentioned above. If no ingredients are listed, respiratory protection is generally not required. If exposure limits are listed and may be exceeded, use approved respiratory protective equipment and filter type appropriate for the listed ingredients. (NIOSH, CEN, etc.). EN 143.

Skin/Body

Use personal protective equipment as required. Take off contaminated clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
Not determined.
Cloud Point
---
Solubility
---
Flash Point
>100 °C
Colour
According to product specification.
Voc Content
10.00 %
Solidification Point
---
Physical State
Liquid.
Melting Point
Undetermined.
Relative Evaporation Rate
---
Relative Density
---
State Under Standard Conditions
---
Solubility In Fat
---
Upper Explosive Limit
Not determined.
Explosive Limits
---
Ph
2.1
Vapor Pressure
Not determined.
Solubility In Water
Fully miscible.
Appearance
---
Auto Ignition Temperature
360 °C
Freezing Point
Undetermined.
Kinematic Viscosity
Not determined.
Molecular Weight
Not determined.
Partition Coefficient
Not determined.
Dynamic Viscosity
Not determined.
Form
Liquid.
Odor Threshold
Not determined.
Bulk Density
---
Vapor Density
Not determined.
Softening Point
---
Physical State Data
liquid
Density
1.1 g/cm³
Odor
Odourless.
Lower Explosive Limit
Not determined.
Flammability
Not applicable.
Crystallisation Point
---
Colour Intensity
---
Properties Status
---
Decomposition Temperature
Not determined.
Boiling Point
100 °C
Metal Corrosion
Not classified.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

Stable under normal conditions. No further relevant information available.

Hazardous reactions

No dangerous reactions known. No further relevant information available.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

Carbon monoxide and carbon dioxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Must not be disposed together with household garbage. Do not allow product to reach sewage system.

Disposal

Must not be disposed together with household garbage.

Waste Codes

08 00 00 WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVES, SEALANTS AND PRINTING INKS EWC
08 01 00 wastes from MFSU and removal of paint and varnish EWC
08 01 12 waste paint and varnish other than those mentioned in 08 01 11 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not Regulated
Shipping Name
Not Regulated
Transport Class
Not Regulated
Packing Group
Not Regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Pieri Top 01?

The signal word is danger.

What is the physical form of Pieri Top 01?

Pieri Top 01 is a liquid. with according to product specification. color. It has odourless. odor.

What is Pieri Top 01 used for?

Construction Chemical.

What are the hazard statements for Pieri Top 01?

This substance has 1 hazard statement:

  • H318: Causes serious eye damage.

What is the melting point of Pieri Top 01?

The melting point is Undetermined. and the boiling point is 100 °C.