P3-topax 990

Product AS SOLD: Remove to fresh air. Treat symptomatically. Get medical attention if symptoms occur. Product AT USE DILUTION: Get medical attention if symptoms occur.

Product AS SOLD: Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Get medical attention if irritation develops and persists. Product AT USE DILUTION: Rinse with plenty of water.

Product AS SOLD: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately. Product AT USE DILUTION: Rinse with plenty of water.

Product AS SOLD: Rinse mouth. Get medical attention if symptoms occur. Product AT USE DILUTION: Rinse mouth. Get medical attention if symptoms occur.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

None known.

Not flammable or combustible.

Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoid inhalation, ingestion and contact with skin and eyes. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.

For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.

Do not allow contact with soil, surface or ground water.

Ensure clean-up is conducted by trained personnel only.

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

Avoid contact with skin and eyes. Do not get in eyes, on skin, or on clothing. Use only with adequate ventilation. Wash hands thoroughly after handling. Do not breathe spray, vapour. Do not mix with bleach or other chlorinated products – will cause chlorine gas. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE).

Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.

Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard.

Good general ventilation should be sufficient to control worker exposure to airborne contaminants.

Recommended preventive skin protection; Gloves; Nitrile rubber; butyl-rubber; Breakthrough time: 1 – 4 hours; Minimum thickness for butyl-rubber 0.3 mm for nitrile rubber 0.2 mm or equivalent (please refer to the gloves manufacturer/distributor for advise).; Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Safety goggles; Face-shield

None required if airborne concentrations are maintained below the exposure limit listed in Exposure Limit Information. Use certified respiratory protection equipment meeting EU requirements(89/656/EEC, (EU) 2016/425), or equivalent, when respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization.

No special protective equipment required.

Consider the provision of containment around storage vessels.

Stable under normal conditions.

No dangerous reaction known under conditions of normal use.

No dangerous reaction known under conditions of normal use.

None known.

None known.

Carbon oxides, nitrogen oxides (NOx)