Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UV Putty Fine
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Putty, Professional use
Manufacturers & Suppliers
EMM International BV
manufacturer
Bohemenstraat 19, 8028 SB Zwolle, Netherlands
+31 38 4676600
http://www.colad.com
Amaric Asso-ciates Ltd.
distributor
Wingbury Courtyard Business Village, HP22 4LW Aylesbury
+44(0)7831547 123
Emergency Contacts
Emergency Contact
+31 38 4676600
Mon-Fri 08:00 - 17:00
National Poisons Information Service (NPIS)
0344-8920111
NHS (general public)
111
NHS (general public)
999
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product does not contain (other) ingredients which are classified according to present knowledge of the supplier and contribute to the classification of the product and hence require reporting in this section.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hexanoic acid, 6-[[1,3,3-trimethyl-5-[[6-oxo-6-[2-[(1-oxo-2-propenyl)oxy]ethoxy]hexyl]oxy]carbonyl]amino]cyclohexyl]methyl]amino]carbonyl]oxy]-, 2-[(1-oxo-2-propenyl) oxy]ethylester | 119107-13-0 | 10 - 25% | Yes |
| Hexane-1,6-diyl diacrylate EC: 235-921-9 | 13048-33-4 | 10% | Yes |
| exo-1,7,7-trimethylbicyclo[2.2.1]hept-2-yl acrylate EC: 227-561-6 | 5888-33-5 | 10% | Yes |
| 4,4'-Isopropylidenedi-phenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane, esters with acrylic acid EC: 500-130-2 | 55818-57-0 | 10% | Yes |
| 1H-Azepine-1-propanoic acid, hexahydro-, 2,2-bis[(1-oxo-2-propen-1-yl)oxy]methyl]butyl ester EC: 690-398-8 | 73003-78-8 | 10% | Yes |
| (1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate EC: 256-032-2 | 42978-66-5 | 2.5% | Yes |
| Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate EC: 282-810-6 | 84434-11-7 | 2.5% | Yes |
| 2,2-bis(acryloyloxy-methyl)butyl acrylate; trimethylolpropane triacrylate EC: 239-701-3 | 15625-89-5 | 2.5% | Yes |
| hexamethyleneimine; homopiperidine; perhydroazepine EC: 203-875-9 | 111-49-9 | 1% | Yes |
D: Certain substances which are susceptible to spontaneous polymerisation or decomposition are generally placed on the market in a stabilised form. It is in this form that they are listed in Part 3. However, such substances are sometimes placed on the market in a non-stabilised form. In this case, the supplier must state on the label the name of the substance followed by the words ‘non-stabilised’.
Notes
All the percentages given are percentages by weight unless stated otherwise. For full text of H-phrases: see SECTION 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.
After contact with skin, wash immediately with plenty of water and soap. Call a POISON CENTER/doctor.
Symptoms: Allergic reactions (such as skin rashes, hives, asthma or anaphylactic shock). Localised redness, oedema, pruritis and/or pain.
Do not rub the eyes. Mechanical stress can cause damage to the cornea. Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/doctor.
Symptoms: Causes tears. Conjunctivitis (pink eye).
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. Call a POISON CENTER or doctor if you feel unwell.
Immediate Medical Attention
For specialist advice physicians should contact the poison centre.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water; Foam; Dry extinguishing powder; ABC-powder;
Water jet.
During fire hazardous fumes/smoke could be produced.
In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety. Ventilate affected area.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Store in a well-ventilated place. Keep container tightly closed. Protect against high temperatures and UV-radiation/sunlight.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation. Provide eyewash stations and safety showers at the workplace.
Wear suitable gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Type of material: PVC: polyvinyl chloride, Nitrile rubber, Butyl rubber, NP: neoprene. Material thickness: Use gloves with a minimum material thickness: ≥ 0,5 mm. Breakthrough time: >240 minutes (permeation: level 5).
Use safety goggle with side protection
In case of inadequate ventilation wear respiratory protection. Full face mask/half mask/quarter mask (EN 136/140). Type: A-P2 (combined filters against particles and organic gases and vapours, colour code: Brown/White).
Chemical protective clothing.
Take appropriate precautions to avoid uncontrolled release into the environment. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
This material is not reactive under normal ambient conditions. If heated: Exothermic polymerisation. If exposed to light: Exothermic polymerisation.
No known hazardous reactions.
UV-radiation/sunlight.
Acids. Bases. Oxidisers.
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not empty into drains. Avoid release to the environment.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Provisions for dangerous goods (ADR) should be complied within the premises.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UV Putty Fine?
The signal word is warning.
What is the physical form of UV Putty Fine?
UV Putty Fine is a solid with grey color. It has characteristic odor.
What is the solubility of UV Putty Fine?
not determined
What is UV Putty Fine used for?
Putty, Professional use
What are the hazard statements for UV Putty Fine?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H351: Suspected of causing cancer.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of UV Putty Fine?
The melting point is not determined and the boiling point is 98.82 °C at 0.71 mbar calculated value, referring to a component of the mixture.