Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TRACEL TSE 4170 ACR
- Product Code
- 050037817
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Commercial and consumer plastic products like disposable dinner ware, food storage, food packaging, baby bottles. Additive Industrial uses: Uses of substances as such or in preparations at industrial sites Formulation [mixing] of preparations and/or re-packaging (excluding alloys) Manufacture of rubber products Manufacture of plastics products, including compounding and conversion Use in closed process, no likelihood of exposure Use in closed, continuous process with occasional controlled exposure Use in closed batch process (synthesis or formulation) Use in batch and other process (synthesis) where opportunity for exposure arises Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) Calendering operations Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities Transfer of substance or preparation into small containers (dedicated filling line, including weighing) Use of blowing agents in manufacture of foam Production of preparations or articles by tabletting, compression, extrusion, pelletisation Formulation of preparations (mixtures) Formulation in materials Industrial use resulting in inclusion into or onto a matrix
Manufacturers & Suppliers
TRAMACO GmbH
manufacturer
Siemensstraße 1-5, 25421 PINNEBERG
+49 4101706 02
Emergency Contacts
GIZ Göttingen
+49 (0) 551 19240
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C,C'-AZODI(FORMAMIDE) EC: 204-650-8 | 123-77-3 | 30 - 45% | Yes |
| ZINC OXIDE EC: 215-222-5 | 1314-13-2 | 1 - 5% | Yes |
All ingredients of this mixture are (pre)registered according to REACH regulation. Full text of H- and EUH-phrases: see section 16.
Notes
This mixture contains the following substances of very high concern (SVHC) which are included in the Candidate List according to Article 59 of REACH: C,C'-AZODI(FORMAMIDE)
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician. In case of inhalation of decomposition products, affected person should be moved into fresh air and kept still.
After contact with skin, wash immediately with plenty of water and soap. After contact with molten product, cool skin area rapidly with cold water. Do not peel solidified product off the skin. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure. In case of skin irritation, consult a physician.
Symptoms: corrosive injuries
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention.
Immediate Medical Attention
Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet alcohol resistant foam Excess water
High power water jet
In case of fire may be liberated: Carbon monoxide Carbon dioxide (CO2) Ammonia (NH3) Nitrogen oxides (NOx)
Co-ordinate fire-fighting measures to the fire surroundings. Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
In case of fire: Wear self-contained breathing apparatus. Do not inhale explosion and combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Avoid dust formation. Use personal protection equipment. Special danger of slipping by leaking/spilling product.
Do not allow to enter into surface water or drains. Cover drains. Do not allow to enter into soil/subsoil.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is as low as possible: Inhalation of dust/particles. If handled uncovered, arrangements with local exhaust ventilation have to be used. It is recommended to design all work processes always so that the following is excluded: Eye contact. Only use the material in places where open light, fire and other flammable sources can be kept away. Wear personal protection equipment (refer to section 8).
Keep/Store only in original container. Ensure adequate ventilation of the storage area. Keep container tightly closed in a cool, well-ventilated place. Protect against : Humidity. UV-radiation/sunlight
When using do not eat, drink, smoke, sniff.
The product is: Not readily flammable Dust can form an explosive mixture with air. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Provide earthing of containers, equipment, pumps and ventilation facilities. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Suitable material : NBR (Nitrile rubber). Breakthrough time (maximum wearing time) : not relevant. Thickness of the glove material : not relevant. Additional hand protection measures : Check leak tightness/impermeability prior to use. Do not wear gloves near rotary machines and tools. Wear cotton undermitten if possible. Take recovery periods for skin regeneration.
Eye glasses with side protection
Respiratory protection necessary at: If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Suitable respiratory protection apparatus: During filling, metering, mixing and sampling must be used: Half-face mask or quarter facepiece: maximum use concentration for substances with exposure limits: P1 filter: up to a max. of 4 times the exposure limit. P2 filter: up to a max. of 10 times the exposure limit. P3 filter: up to a max. of 30 times the expo. Remark: The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used.
Suitable protective clothing : lab coat Overall Disposable suit. Remark : Only wear fitting, comfortable and clean protective clothing. Barrier creams are not substitutes for body protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
No information available.
No information available.
No information available.
Carbon monoxide Carbon dioxide (CO2) Ammonia (NH3)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the industry and process.
Dispose of waste according to "Kreislaufwirtschafts- und Abfallgesetz (KrW-/AbfG)".
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Directive 67/548/EEC and Directive 1999/45/EEC were repealed with effect from 1 June 2015 (Article 60, Regulation (EC) No. 1272/2008 of 16 December 2008).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TRACEL TSE 4170 ACR?
The signal word is danger.
What is the physical form of TRACEL TSE 4170 ACR?
TRACEL TSE 4170 ACR is a granulate appearing as granulate with according to product specification color. It has characteristic odor.
What is TRACEL TSE 4170 ACR used for?
Commercial and consumer plastic products like disposable dinner ware, food storage, food packaging, baby bottles. Additive Industrial uses: Uses of substances as such or in preparations at industrial sites Formulation [mixing] of preparations and/or re-packaging (excluding alloys) Manufacture of rubber products Manufacture of plastics products, including compounding and conversion Use in closed process, no likelihood of exposure Use in closed, continuous process with occasional controlled exposure Use in closed batch process (synthesis or formulation) Use in batch and other process (synthesis) where opportunity for exposure arises Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) Calendering operations Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities Transfer of substance or preparation into small containers (dedicated filling line, including weighing) Use of blowing agents in manufacture of foam Production of preparations or articles by tabletting, compression, extrusion, pelletisation Formulation of preparations (mixtures) Formulation in materials Industrial use resulting in inclusion into or onto a matrix
What are the hazard statements for TRACEL TSE 4170 ACR?
This substance has 2 hazard statements:
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H412: Harmful to aquatic life with long lasting effects.