Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TRACEL® P 5205
- Product Code
- 050040085
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
AC 0.5 - Commercial and consumer plastic products like disposable dinner ware, food storage, food packaging, baby bottles. PC 0.64 - Additive Industrial uses: Uses of substances as such or in preparations at industrial sites Formulation [mixing] of preparations and/or re-packaging (excluding alloys) SU 11 - Manufacture of rubber products SU 12 - Manufacture of plastics products, including compounding and conversion PROC 1 - Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions PROC 2 - Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions PROC 3 - Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment condition PROC 4 - Chemical production where opportunity for exposure arises PROC 5 - Mixing or blending in batch processes PROC 6 - Calendering operations PROC 8a - Transfer of substance or mixture (charging and discharging) at non-dedicated facilities PROC 8b - Transfer of substance or mixture (charging and discharging) at dedicated facilities PROC 9 - Transfer of substance or mixture into small containers (dedicated filling line, including weighing) PROC 12 - Use of blowing agents in manufacture of foam PROC 14 - Tabletting, compression, extrusion, pelletisation, granulation ERC 2 - Formulation into mixture (mixtures) ERC 3 - Formulation in materials ERC 5 - Use at industrial site leading to inclusion into/onto article
Uses advised against
For use in industrial installations only.
Manufacturers & Suppliers
TRAMACO GMBH
manufacturer
Lise-Meitner-Allee 8, 25436 TORNESCH
+49 4101 706 02
Emergency Contacts
GIZ Göttingen
+49 (0) 551 19240
24h
National Poisons Information Centre
+353 1 809 2166
NCEC, National Chemical Emergency Centre
+44 (0) 1235 239 670
NCEC, National Chemical Emergency Centre
+44 1865 407333
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C,C'-azodi(formamide) EC: 204-650-8 | 123-77-3 | 50 - 55% | Yes |
All ingredients of this mixture have been registered according to (EU) REACH regulation or are exempt from registration.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician. In case of inhalation of decomposition products, affected person should be moved into fresh air and kept still.
Symptoms: respiratory tract irritation
After contact with skin, wash immediately with plenty of water and soap. After contact with molten product, cool skin area rapidly with cold water. Do not peel solidified product off the skin. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure. In case of skin irritation, consult a physician.
Symptoms: corrosive injuries, skin irritation
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention.
Immediate Medical Attention
Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet alcohol resistant foam Excess water
Full water jet
In case of fire may be liberated: Carbon monoxide Carbon dioxide (CO2) Ammonia (NH3) Nitrogen oxides (NOx)
Co-ordinate fire-fighting measures to the fire surroundings. Do not inhale explosion and combustion gases. Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Special danger of slipping by leaking/spilling product.
Do not allow to enter into surface water or drains. Cover drains. Do not allow to enter into soil/subsoil.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is as low as possible: Inhalation of dust/particles If handled uncovered, arrangements with local exhaust ventilation have to be used. It is recommended to design all work processes always so that the following is excluded: Eye contact Only use the material in places where open light, fire and other flammable sources can be kept away. Wear personal protection equipment (refer to section 8).
Keep/Store only in original container. Ensure adequate ventilation of the storage area. Keep container tightly closed in a cool, well-ventilated place.
When using do not eat, drink, smoke, sniff.
Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Provide earthing of containers, equipment, pumps and ventilation facilities. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Suitable material : NBR (Nitrile rubber). Breakthrough time : not relevant. Thickness of the glove material : not relevant. Additional hand protection measures : Check leak tightness/impermeability prior to use. Do not wear gloves near rotary machines and tools. Wear cotton undermitten if possible. Take recovery periods for skin regeneration.
Eye glasses with side protection
Respiratory protection necessary at: If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. During filling, metering, mixing and sampling must be used: Half-face mask or quarter facepiece: maximum use concentration for substances with exposure limits: P1 filter: up to a max. of 4 times the exposure limit. P2 filter: up to a max. of 10 times the exposure limit. P3 filter: up to a max. of 30 times the expo. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used.
Suitable protective clothing : lab coat Overall Disposable suit. Remark : Only wear fitting, comfortable and clean protective clothing. Barrier creams are not substitutes for body protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Information is given in sub section 10.3.
Information is given in sub section 10.3.
The product in the delivered form is not dust explosion capable; the enrichment of fine dust however leads to the danger of dust explosion. The product is thermally unstable. Urea and zinc compounds decrease the decomposition temperature. Due to gaseous decomposition products, overpressure can occur in tightly sealed containers. Danger of bursting container.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid high temperatures or direct sunlight. Further information on storage conditions: see sub section 7.2.
No information available.
Carbon monoxide Carbon dioxide (CO2) Ammonia (NH3)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3242
- Shipping Name
- AZODICARBONAMIDE
- Transport Class
- 4.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TRACEL® P 5205?
The signal word is danger.
What is the physical form of TRACEL® P 5205?
TRACEL® P 5205 is a paste appearing as paste with yellow color. It has characteristic odor.
What is TRACEL® P 5205 used for?
AC 0.5 - Commercial and consumer plastic products like disposable dinner ware, food storage, food packaging, baby bottles. PC 0.64 - Additive Industrial uses: Uses of substances as such or in preparations at industrial sites Formulation [mixing] of preparations and/or re-packaging (excluding alloys) SU 11 - Manufacture of rubber products SU 12 - Manufacture of plastics products, including compounding and conversion PROC 1 - Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions PROC 2 - Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions PROC 3 - Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment condition PROC 4 - Chemical production where opportunity for exposure arises PROC 5 - Mixing or blending in batch processes PROC 6 - Calendering operations PROC 8a - Transfer of substance or mixture (charging and discharging) at non-dedicated facilities PROC 8b - Transfer of substance or mixture (charging and discharging) at dedicated facilities PROC 9 - Transfer of substance or mixture into small containers (dedicated filling line, including weighing) PROC 12 - Use of blowing agents in manufacture of foam PROC 14 - Tabletting, compression, extrusion, pelletisation, granulation ERC 2 - Formulation into mixture (mixtures) ERC 3 - Formulation in materials ERC 5 - Use at industrial site leading to inclusion into/onto article
What are the hazard statements for TRACEL® P 5205?
This substance has 1 hazard statement:
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.