Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MASQ glue
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Seam sealant
Uses advised against
No information available at present.
Manufacturers & Suppliers
Dumaplast nv
manufacturer
Vliegplein 41, B-9990 Maldegem, Belgium
+32 50 72 90 11
http://www.masq.be
Emergency Contacts
ISA
+49 (0) 700 / 24 112 112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Impurities, test data and additional information may have been taken into account in classifying and labelling the product. For the text of the H-phrases and classification codes (GHS/CLP), see Section 16. The substances named in this section are given with their actual, appropriate classification! For substances that are listed in appendix VI, table 3.1 of the regulation (EC) no. 1272/2008 (CLP regulation) this means that all notes that may be given here for the named classification have been taken into account.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Trimethoxyvinylsilane EC: 220-449-8 | 2768-02-7 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply person with fresh air and consult doctor according to symptoms.
Wipe off residual product carefully with a soft, dry cloth. Remove polluted, soaked clothing immediately, wash thoroughly with plenty of water and soap.
Symptoms: irritation of the skin (flare)
Remove contact lenses. Wash thoroughly for several minutes using copious water. Seek medical help if necessary.
Rinse the mouth thoroughly with water. Do not induce vomiting - give copious water to drink. Consult doctor immediately.
Symptoms: Upon contact with stomach acid development of: Methanol
Immediate Medical Attention
Consult doctor immediately (ingestion), consult doctor according to symptoms (inhalation), seek medical help if necessary (eye contact).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Adapt to the nature and extent of fire. Water jet spray / alcohol resistant foam / CO2 / dry extinguisher.
None known
In case of fire the following can develop: Oxides of carbon, Toxic gases
In case of fire and/or explosion do not breathe fumes.
Firefighter Protection
Protective respirator with independent air supply. According to size of fire Full protection, if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Resolve leaks if this possible without risk. If applicable, caution - risk of slipping.
If leakage occurs, dam up. Resolve leaks if this possible without risk. Prevent from entering drainage system. Prevent surface and ground-water infiltration, as well as ground penetration.
Soak up with absorbent material; Pick up mechanically
Materials: universal binding agent, sand, diatomaceous earth, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes or skin. Avoid long lasting or intensive contact with skin. Observe directions on label and instructions for use.
Not to be stored in gangways or stair wells. Store product closed and only in original packing. Store in a dry place.
Eating, drinking, smoking, as well as food-storage, is prohibited in work-room. General hygiene measures for the handling of chemicals are applicable. Wash hands before breaks and at end of work. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothing and protective equipment before entering areas in which food is consumed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by local suction or general air extraction. If this is insufficient to maintain the concentration under the WEL or AGW values, suitable breathing protection should be worn.
Chemical resistant protective gloves (EN 374). If applicable: Protective gloves made of butyl (EN 374). Protective nitrile gloves (EN 374). Protective hand cream recommended. Permeation time (penetration time) in minutes: 30. The breakthrough times determined in accordance with EN 16523-1 were not obtained under practical conditions. The recommended maximum wearing time is 50% of breakthrough time.
With danger of contact with eyes. Tight fitting protective goggles with side protection (EN 166).
Normally not necessary.
Protective working garments (e.g. safety shoes EN ISO 20345, long-sleeved protective working garments).
No information available at present.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable with proper storage and handling.
Product may hydrolyse.
None known
Strong heat, Protect from humidity, Product may hydrolyse.
Avoid contact with strong alkalis, Avoid contact with strong acids.
On contact with moist air: Methanol
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
E.g. suitable incineration plant.
Sewage disposal shall be discouraged. Pay attention to local and national official regulations. E.g. suitable incineration plant. Hardened product: E.g. dispose at suitable refuse site.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Comply with national regulations/laws governing maternity protection (national implementation of the Directive 92/85/EEC)! General hygiene measures for the handling of chemicals are applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MASQ glue?
The signal word is no signal word.
What is the physical form of MASQ glue?
MASQ glue is a paste, solid with according to specification color. It has aromatic odor.
What is the solubility of MASQ glue?
Not determined
What is MASQ glue used for?
Seam sealant
What is the melting point of MASQ glue?
The melting point is <-40 °C and the boiling point is Not determined.