Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Universal Glue Extra 65ml
- Product Code
- 0893 100 021
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives Professional use product
Uses advised against
Not applicable
Manufacturers & Suppliers
Wurth UK Ltd
manufacturer
1 Centurion Way Erith, Kent
+44 (0)3300 555 444
Emergency Contacts
Emergency Contact
+44 (0)870 190 6777
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane | 92128-66-0 | 30 - 50% | Yes |
| Butanone EC: 201-159-0 | 78-93-3 | 20 - 30% | Yes |
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 20 - 30% | Yes |
| n-Hexane EC: 203-777-6 | 110-54-3 | 0.25 - 1% | Yes |
| Rosin EC: 232-475-7 | 8050-09-7 | 0.1 - 1% | Yes |
| Zinc oxide EC: 215-222-5 | 1314-13-2 | 0.25 - 1% | Yes |
| 2,6-Di-tert-butyl-p-cresol EC: 204-881-4 | 128-37-0 | 0.25 - 1% | Yes |
| Dodecane-1-thiol EC: 203-984-1 | 112-55-0 | 0.025 - 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention.
Symptoms: May cause drowsiness or dizziness.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Symptoms: Causes skin irritation.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Get medical attention.
Symptoms: Causes serious eye irritation.
If swallowed, DO NOT induce vomiting. Get medical attention. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
High volume water jet
Flash back possible over considerable distance. Vapours may form explosive mixtures with air. Exposure to combustion products may be a hazard to health.
Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow safe handling advice (see section 7) and personal protective equipment recommendations (see section 8).
Provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material. Suppress (knock down) gases/vapours/mists with a water spray jet. Clean up remaining materials from spill with suitable absorbent.
Materials: Inert absorbent material, suitable absorbent.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get on skin or clothing. Do not breathe vapours. Do not swallow. Do not get in eyes. Wash skin thoroughly after handling. Handle in accordance with good industrial hygiene and safety practice. Keep container tightly closed. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.
Keep in a cool, well-ventilated place. Store in accordance with the particular national regulations.
Wash skin thoroughly after handling. Handle in accordance with good industrial hygiene and safety practice. When using do not eat, drink or smoke. Wash contaminated clothing before re-use. If exposure to chemical is likely during typical use, provide eye flushing systems and safety showers close to the working place.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimize workplace exposure concentrations. If sufficient ventilation is unavailable, use with local exhaust ventilation. Use explosion-proof electrical, ventilating and lighting equipment.
Material: butyl-rubber. Break through time: > 240 min. Glove thickness: 0.7 mm. Guideline: Equipment should conform to BS EN 374. Remarks: Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.
Wear the following personal protective equipment: Safety goggles. Equipment should conform to BS EN 166
If adequate local exhaust ventilation is not available or exposure assessment demonstrates exposures outside the recommended guidelines, use respiratory protection. Filter should conform to BS EN 14387. Filter type: Combined particulates and organic vapour type (A-P)
Select appropriate protective clothing based on chemical resistance data and an assessment of the local exposure potential. Wear the following personal protective equipment: If assessment demonstrates that there is a risk of explosive atmospheres or flash fires, use flame retardant antistatic protective clothing. Skin contact must be avoided by using impervious protective clothing (gloves, aprons, boots, etc).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
Highly flammable liquid and vapour. Vapours may form explosive mixture with air. Can react with strong oxidizing agents.
Heat, flames and sparks.
Oxidizing agents
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Universal Glue Extra 65ml?
The signal word is danger.
What is the physical form of Universal Glue Extra 65ml?
Universal Glue Extra 65ml is a paste appearing as paste with amber color. It has solvent-like odor.
What is Universal Glue Extra 65ml used for?
Adhesives Professional use product
What are the hazard statements for Universal Glue Extra 65ml?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Universal Glue Extra 65ml?
The melting point is No data available and the boiling point is 77 °C.