NextSDS Logo
Safety Data Sheet EN

Ingromat FL

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ingromat FL
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaning agent Industrial use Professional uses

Uses advised against

No additional information available

Manufacturers & Suppliers

W

Wandres Brush-Hitec GmbH

manufacturer

Talstraße, 10a, DE– D-79256 Buchenbach-Wagensteig, Germany

+49 (0)7661 - 9330 - 0

F

Franz Becher

manufacturer

+49 7661 9330-827

Emergency Contacts

National Health Service (NHS) England and Scotland

111

24 hour

National Health Service (NHS) Wales

0845 46 47

24 hour

National Health Service (NHS)

999

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) 55965-84-9 0.1% Yes

Notes

Note B : Some substances (acids, bases, etc.) are placed on the market in aqueous solutions at various concentrations and, therefore, these solutions require different classification and labelling since the hazards vary at different concentrations. In Part 3 entries with Note B have a general designation of the following type: ‘nitric acid … %’. In this case the supplier must state the percentage concentration of the solution on the label. Unless otherwise stated, it is assumed that the percentage concentration is calculated on a weight/weight basis. Full text of H- and EUH-statements: see section 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Skin contact

Wash skin with plenty of water.

Eye contact

Rinse eyes with water as a precaution.

Ingestion

Call a poison center or a doctor if you feel unwell.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Not combustible.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area.

Environmental

Avoid release to the environment.

Cleanup methods

Take up liquid spill into absorbent material. Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.

—

Related Products

Similar products with comparable safety profiles

I

Ingromat A

---

E

EMFLAKE 3912

---

I

IMPREGNOL 6900

---

I

Interflon Grease OG

---

E

Emflake 3912

---

E

Emflake 3912

---

E

Emflake 3912

---

S

SUMILIZER® GM - GM(F)

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation of the work station. Wear personal protective equipment.

Storage

Store in a well-ventilated place. Keep cool.

Hygiene

Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

In case of repeated or prolonged contact wear gloves. ISO 374-1. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. Please follow the instructions related to the permeability and the penetration time provided by the manufacturer. Gloves must be replaced after each use and whenever signs of wear or perforation appear

Eyes

Use splash goggles when eye contact due to splashing is possible. ISO 16321-1

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment. Particle filter. EN 143

Skin/Body

Wear suitable protective clothing. EN ISO 13688

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Physical State Data
liquid
Lower Explosive Limit
Not available
Flash Point
Not available
Colour
colourless.
Properties Status
---
Explosive Limits
---
Evaporation Rate
---
Solubility
Not available
Relative Density
Not available
Solubility In Fat
---
Vapor Density
---
Appearance
---
Form
---
Vapor Pressure
Not available
Solubility In Water
---
Colour Intensity
---
Flammability
Not applicable
State Under Standard Conditions
---
Kinematic Viscosity
Not available
Freezing Point
Not available
Boiling Point
≈ 100 °C
Softening Point
---
Cloud Point
---
Dynamic Viscosity
---
Decomposition Temperature
Not available
Upper Explosive Limit
Not available
Auto Ignition Temperature
Not self-igniting
Density
0.997 g/cm³
Metal Corrosion
---
Voc Content
---
Melting Point
Not applicable
Physical State
Liquid
Partition Coefficient
Not available
Molecular Weight
---
Odor Threshold
Not available
Ph
Not available
Bulk Density
---
Solidification Point
---
Relative Evaporation Rate
---
Odor
odourless.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

The product is non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

No additional information available

Incompatible

No additional information available

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Hazardous to the aquatic environment, short-term : Not classified (Based on available data, the classification criteria are not met) (acute) Hazardous to the aquatic environment, long-term : Not classified (Based on available data, the classification criteria are not met) (chronic) Not rapidly degradable | reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (55965-84-9) | | | --- | --- | | LC50 - Fish [1] | 0.19 mg/l (96 h; Oncorhynchus mykiss; EPA OPP 72-1) | | EC50 - Crustacea [1] | 0.18 mg/l (48 h; Daphnia magna; EPA OPP 72-2) | | ErC50 algae | 0.0273 mg/l (72 h; Pseudokirchneriella subcapitata; (OECD 201 method)) | | NOEC chronic fish | 0.098 mg/l (28 d; Oncorhynchus mykiss; (OECD 215 method)) | | NOEC chronic crustacea | 0.328 mg/l (21 d; Daphnia magna; (OECD 211 method)) | | NOEC chronic algae | 0.0066 mg/l (72 h; Skeletonema costatum (marine diatom); (OECD 201 method)) |

The substance is not classified as hazardous to the aquatic environment (acute or chronic) based on available data.

12.2. Persistence and degradability

Ingromat FL: The surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No. 648/2004 on detergents. Data to support this assertion are held at the disposal of the competent authorities of the Member States and will be made available to them, at their direct request or at the request of a detergent manufacturer. reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (55965-84-9): Readily biodegradable, failing 10-d window. Biodegradation: 62 % (29 d; (OECD 301B method))

12.3. Bioaccumulative potential

Ingromat FL: The product has not been tested. reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (55965-84-9): Bioconcentration factor (BCF REACH): ≈ 41 (20 °C; 0.12 mg/L; EPA OPP 165-4) Partition coefficient n-octanol/water (Log Pow): -0.32 – 0.7 (20 °C; (OECD 117 method))

12.4. Mobility in soil

Ingromat FL Ecology - soil: The product has not been tested. reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (55965-84-9) Surface tension: 73 mN/m (19.5 °C; 1 g/L; Test method EU A.5) Ecology - soil: Low mobility (soil).

12.5. Results of PBT and vPvB assessment

Ingromat FL PBT: not relevant – no registration required vPvB: not relevant – no registration required

The substance is not considered PBT or vPvB as registration is not required.

12.6. Endocrine disrupting properties

No additional information available

12.7. Other adverse effects

Other adverse effects : No additional information available

No additional information available

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal must be done according to official regulations.

Disposal

Do not dispose of with domestic waste.

Waste Codes

20 01 30 detergents other than those mentioned in 20 01 29 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not regulated
Transport Class
Not regulated
Packing Group
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This safety data sheet is for informational purposes only and does not comply with national legal requirements without reference to a national distributor. The national distributor is responsible for a legally compliant safety data sheet.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ingromat FL?

The signal word is no signal word.

What is the physical form of Ingromat FL?

Ingromat FL is a liquid with colourless. color. It has odourless. odor.

What is the solubility of Ingromat FL?

Not available

What is Ingromat FL used for?

Cleaning agent Industrial use Professional uses

What is the melting point of Ingromat FL?

The melting point is Not applicable and the boiling point is ≈ 100 °C.