Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LANKROFLEX E2307
- Product Code
- P14101
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119471314-43-0001
Identified Uses
Plasticiser and co-stabiliser for PVC. Plasticiser for Polymers.
Manufacturers & Suppliers
VALTRIS SPECIALTY CHEMICALS
Lankro Way, Eccles, Manchester, M30 0LX
+44 (0) 161 785 1111
Emergency Contacts
VALTRIS SPECIALTY CHEMICALS
+44 (0) 161 785 1300
24hr
EU CARECHEM 24
+44 1273 289451
Australia CARECHEM 24
18000 74234
New Zealand CARECHEM 24
0800 446 881
Malaysia CARECHEM 24
+60 3 6207 4347
India CARECHEM 24
000 800 100 7479
Asia Pacific CARECHEM 24
+65 3158 1412
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| LANKROFLEX E2307 | --- | --- | No |
Notes
No classified ingredients, or those having occupational exposure limits, present above the levels of disclosure.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air at once. Rinse nose and mouth with water. Get medical attention.
Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention if any discomfort continues. Wash contaminated clothing before reuse.
Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention immediately. Continue to rinse.
Do not induce vomiting. Rinse mouth thoroughly with water. Give plenty of water to drink. Get medical attention.
Immediate Medical Attention
Get medical attention immediately (for eye contact).
Medical Treatment
Symptomatic treatment is advised.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with foam, carbon dioxide, dry powder or water fog.
Toxic gases or vapours.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid discharge into drains or watercourses or onto the ground.
Absorb in vermiculite, dry sand or earth and place into containers. Flush contaminated area with plenty of water.
Materials: vermiculite, dry sand or earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and prolonged skin contact. Use this product in a well ventilated area, particularly as good ventilation is essential when PVC processing temperatures are maintained, and fumes from the PVC formulation require regulating.
Store in tightly-closed, original container in a well-ventilated place. Avoid the following conditions: Water, moisture.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective gloves. It is recommended that gloves are made of the following material: Polyvinyl chloride (PVC). (CEN EN420 - PVC)
Wear tight-fitting, chemical splash goggles or face shield. (CEN EN166)
Wear appropriate clothing to prevent any possibility of skin contact. (CEN EN340) Wash contaminated clothing before reuse.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures.
There are no known reactivity hazards associated with this product.
Not applicable.
Avoid excessive heat for prolonged periods of time.
Avoid contact with oxidising agents. Strong acids.
Oxides of carbon. Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- This product is not classified as hazardous for transport.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Guidance: Workplace Exposure Limits EH40. CHIP for everyone HSG228. Approved Classification and Labelling Guide (Sixth edition) L131. Safety Data Sheets for Substances and Preparations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LANKROFLEX E2307?
The signal word is no signal word.
What is the physical form of LANKROFLEX E2307?
LANKROFLEX E2307 is a liquid appearing as liquid. solidifies at low temperatures. with light (or pale). yellow. color.
What is the solubility of LANKROFLEX E2307?
Not determined. Insoluble in water.
What is LANKROFLEX E2307 used for?
Plasticiser and co-stabiliser for PVC. Plasticiser for Polymers.
What are the hazard statements for LANKROFLEX E2307?
This substance has 1 hazard statement:
- Not Classified
What is the melting point of LANKROFLEX E2307?
The melting point is Not determined. and the boiling point is >200°C.