Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LANKROMARK LZK101
- Product Code
- P11026
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Stabiliser for PVC.
Manufacturers & Suppliers
Akcros Chemicals Limited
Lankro Way, Eccles, Manchester, M30 0LX
+44 (0) 161 785 1111
Emergency Contacts
Akcros Chemicals Limited
+44 (0) 161 785 1300
24hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc 2-ethylhexanoate EC: 205-251-1 | 136-53-8 | 30 - 60% | Yes |
| Hydrocarbons, C10-C13, n-alkanes, <2% aromatics EC: 929-018-5 | 64771-72-8 | 30 - 60% | Yes |
| Potassium 2-Ethylhexanoate EC: 221-625-7 | 3164-85-0 | 10 - 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air at once. Rinse nose and mouth with water. Get medical attention.
Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention. Wash contaminated clothing before reuse.
Symptoms: Causes skin irritation.
Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention immediately. Continue to rinse.
Symptoms: Risk of serious damage to eyes.
Do not induce vomiting. Rinse mouth thoroughly with water. Give plenty of water to drink. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately for ingestion and eye contact. Get medical attention for inhalation and skin contact.
Medical Treatment
Symptomatic treatment is advised.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with foam, carbon dioxide, dry powder or water fog.
Metal oxides. Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not discharge into drains or watercourses or onto the ground.
Collect and place in suitable waste disposal containers and seal securely.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of vapours and contact with skin and eyes.
Store in tightly-closed, original container in a dry, cool and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Avoid inhalation of vapours. Observe any occupational exposure limits for the product or ingredients.
Wear protective gloves. It is recommended that gloves are made of the following material: Polyvinyl chloride (PVC). (DIN EN374). It should be noted that liquid may penetrate the gloves. Frequent changes are recommended.
Wear tight-fitting, chemical splash goggles or face shield. (CEN EN166)
If ventilation is inadequate, suitable respiratory protection must be worn. Wear a respirator fitted with the following cartridge: Gas filter, type A2.
Wear appropriate clothing to prevent any possibility of skin contact. (CEN EN340) Wash contaminated clothing before reuse.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures.
The following materials may react with the product: Water. Oxidising materials.
Not applicable.
Avoid excessive heat for prolonged periods of time.
Avoid contact with oxidising agents. Water effects hydrolysis of product.
Oxides of carbon. Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LANKROMARK LZK101?
The signal word is danger.
What is the physical form of LANKROMARK LZK101?
LANKROMARK LZK101 is a liquid appearing as liquid. with clear liquid. yellow. color. It has characteristic. odor.
What is the solubility of LANKROMARK LZK101?
Not determined.
What is LANKROMARK LZK101 used for?
Stabiliser for PVC.
What are the hazard statements for LANKROMARK LZK101?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H361d: Suspected of damaging the unborn child.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of LANKROMARK LZK101?
The melting point is -15°C and the boiling point is >190°C.