Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DRY BLEND F
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Exempted
Identified Uses
Industrial use: Plastics engineering (eg. extrusion, injection molding, calandering)
Manufacturers & Suppliers
DUMA COMPOUND nv
manufacturer
Vliegplein 41, B - 9990 Maldegem
+32 50 72 90 11
http://www.dumaplast.be
Emergency Contacts
Luc Dhaene
+32 50 72 90 13
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Rigid PVC Compound
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium acetylacetonate EC: 243-001-3 | 19372-44-2 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation of decomposition products, breathe fresh air into the patient and keep the patient at rest. Take medical treatment.
In case of contact with the skin, wash with soap and water. Do not remove the solidified product on the skin.
In case of contact with the eyes, rinse immediately with plenty of water.
If accidentally swallowed, drink plenty of water and seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Cooperative / accommodating to all common extinguishing agents.
In case of fire, gas release of hazardous combustion: Carbon monoxide (CO), Carbon dioxide (CO₂), Hydrochloric acid (HCl)
Firefighter Protection
In case of fire use a respirator that is independent of the circulating air.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not dispose into the drains / surface water / groundwater.
Pick up mechanically and send for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure a good exhaust / ventilation on the treatment machine.
Do not expose to prolonged heat action. Do not store at temperatures above 30° C. In the original container tightly closed and stock temperature of up to 25° C.
Avoid the accumulation of electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
see point 7; no excessive measures are necessary.
Protective gloves against heat during the processing of the product.
Safety glasses
In case of dust, wear a fine dust mask
Specific measures for body protection are not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Possibility of release of toxic vapors by heating on decomposition temperature.
Excessive thermal load capacity on time and temperature can lead to decomposition between hydrochloric detachment (hydrochloric acid)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The waste code shown according to regulations of waste classification is counted as a recommendation. The final waste code should be assigned by the authorities responsible for the disposal of local waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DRY BLEND F?
The signal word is no signal word.
What is the physical form of DRY BLEND F?
DRY BLEND F is a powder appearing as powder with variable according to the coloring color. It has hardly noticeable odor.
What is DRY BLEND F used for?
Industrial use: Plastics engineering (eg. extrusion, injection molding, calandering)