NextSDS Logo
Safety Data Sheet EN

GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND
Synonyms
Pottery Clay, Dry Clay, Moist Clay

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Non-exhaustive list: pottery, artware, ceramic building materials

Uses advised against

None applicable

Manufacturers & Suppliers

L

Laguna Clay Co.

manufacturer

14400 Lomitas Ave., City of Industry, CA 91746

(626) 330-0631

Emergency Contacts

Emergency Contact

911

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1A
STOT RE Cat. 1

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H316 Can cause skin, respiratory, and eye irritation.
H332 Prolonged inhalation of dust may cause lung injury. Inhalation of high concentrations of dust may cause mechanical irritation and discomfort of the respiratory tract. Repeated exposure may have chronic effects.
H350 Cancer Hazard. Contains quartz (crystalline silica) which may cause cancer. Risk of cancer depends upon duration and level of exposure to the dust. Not an acute hazard.

Precautionary Statements

P261 Avoid breathing dust.
P280 Wear protective gloves, eye, and respiratory protection.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Feldspar 68476-25-5 65% No
Crystalline Silica - quartz 14808-60-7 10 - 25% No
Kaolin 1332-58-7 5 - 10% No

Notes

A trade secret claim is made for this item.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move victim to fresh air in well ventilated area. If coughing or irritation persists, seek medical attention.

Symptoms: Inhalation of high concentrations of dry clay dust may cause mechanical irritation and discomfort. Long term exposure may cause chronic effects (see section 11).

Skin contact

If irritation occurs, wash thoroughly with water. If it persists, seek medical attention.

Symptoms: Prolonged contact with large amounts of dust may cause mechanical irritation.

Eye contact

If eye contact occurs, rinse immediately with plenty of water. If irritation persists, seek medical attention.

Symptoms: Prolonged contact with large amounts of dust may cause mechanical irritation.

Ingestion

Consult physician and/or obtain competent medical assistance.

Symptoms: Large quantities ingested may cause gastrointestinal irritation.

Immediate Medical Attention

If irritation persists, seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use appropriate extinguishing media for surrounding fire.

Specific hazards

Clay mixture in dry or moist form is not flammable and does not support fire. The paper bags or plastic bags and cardboard boxes containing the mixture are flammable.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

There are no emergency procedures required for this mixture.

Environmental

Clay is a natural mineral product mixture and will not cause adverse effects to the water system other than turbidity from suspended particles.

Cleanup methods

If appropriate, use gentle water spray to wet down and minimize dust generation.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use proper lifting techniques to avoid physical injury.

Storage

No special storage considerations. Do not store moist clay mixture below freezing point (< 0 °C or <32°F).

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

In the event that dust is generated, use local exhaust ventilation or other engineering controls as required to maintain exposures below applicable occupational exposure limits (TLV).

Hands

Use gloves and/or protective clothing if abrasion or allergic reactions are experienced.

Eyes

Use of NIOSH/OSHA approved safety glasses with side shields is recommended. Face shields should also be used when dry sawing clay products. Wear tight fitting dust goggles when excessively (visible) dusty conditions are present or are anticipated. NIOSH recommends that contact lenses not be worn when working with crystalline silica dust.

Respiratory

When such controls are not feasible, NIOSH/MSHA approved respirators must be worn in accordance with a respiratory protection program which meets OSHA requirements as set forth at 29 CFR1910.134 and ANSI Z88.2-1080 "Practices for Respiratory Protection". In most cases, a disposable N-95 Particulate Respirator is sufficient.

Skin/Body

Protective Clothing is not essential. Use gloves and/or protective clothing if abrasion or allergic reactions are experienced.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Partition Coefficient
Not Applicable
State Under Standard Conditions
---
Vapor Density
Not Applicable
Properties Status
---
Density
---
Colour Intensity
---
Solubility
---
Odor Threshold
Not Applicable
Solubility In Fat
---
Bulk Density
---
Auto Ignition Temperature
Not Applicable
Solidification Point
---
Flammability
Not Applicable
Physical State Data
solid
Explosive Limits
---
Boiling Point
Not Applicable
Evaporation Rate
No data available
Metal Corrosion
---
Solubility In Water
---
Decomposition Temperature
Not Applicable
Upper Explosive Limit
---
Flash Point
Not Applicable
Molecular Weight
---
Kinematic Viscosity
---
Melting Point
> 1200 °C (>2150°F)
Lower Explosive Limit
---
Relative Evaporation Rate
---
Relative Density
~2.6 gm/cc
Freezing Point
< 0 °C (<32°F)
Odor
Earthy odor
Vapor Pressure
Not Applicable
Crystallisation Point
---
Dynamic Viscosity
---
Appearance
Lump/dry powder or moist mud brick
Cloud Point
---
Colour
White, red, brown
Voc Content
---
Softening Point
---
Physical State
Solid
Ph
6 - 8
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at standard temperature and pressure. No stabilizers required to maintain chemical stability. Safety issues - Mold may form in plastic bag (moist clay mixture) after several months of shelf life.

Reactivity

No dangerous reactions are known under normal conditions of use

Hazardous reactions

None known

Avoid

None known

Incompatible

None known

Decomposition

None known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND known by?

GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND is also known as: Pottery Clay, Dry Clay, Moist Clay

What is the hazard signal word for GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND?

The signal word is danger.

What is the physical form of GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND?

GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND is a solid appearing as lump/dry powder or moist mud brick with white, red, brown color. It has earthy odor odor.

What is GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND used for?

Non-exhaustive list: pottery, artware, ceramic building materials

What are the hazard statements for GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND?

This substance has 3 hazard statements:

  • H316: Can cause skin, respiratory, and eye irritation.
  • H332: Prolonged inhalation of dust may cause lung injury. Inhalation of high concentrations of dust may cause mechanical irritation and discomfort of the respiratory tract. Repeated exposure may have chronic effects.
  • H350: Cancer Hazard. Contains quartz (crystalline silica) which may cause cancer. Risk of cancer depends upon duration and level of exposure to the dust. Not an acute hazard.

What is the melting point of GSG919 CORNWALL STONE- LAGUNA SUB DRY BLEND?

The melting point is > 1200 °C (>2150°F) and the boiling point is Not Applicable.