Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HARDWAXOIL TITAN MATT 8091
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
DEBAL COATINGS NV.
manufacturer
Industrieweg 29.8800.Beveren-Roeselare.Belgique.
+32 51 30 11 40
http://www.ciranova.eu
Emergency Contacts
Centre Antipoisons / Antigifcentrum (BRUXELLES)
070 245 245
National Poisons Information Service (Birmingham Unit)
844 892 0111
Poisons Information Centre of Ireland (DUBLIN)
+353 1 809 25 66
Poisons Information Centre of Ireland (DUBLIN)
+353 1 837 9964
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
CONTAINS VEGETABLE OIL-BASED RESIN
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| HYDROCARBONS, C10-C13, N-ALKANES, ISOALKANES, CYCLICS, < 2% AROMATICS EC: 918-481-9 | --- | 25 - 50% | Yes |
| HYDROCARBONS, C11-C12, ISOALKANES, <2% AROMATICS EC: 918-167-1 | --- | 2.5 - 10% | Yes |
| HYDROCARBONS, C11-C13, ISOALKANES, <2% AROMATICS EC: 920-901-0 | --- | 2.5 - 10% | Yes |
| NEODECANOIC ACID, ZINC SALT, BASIC EC: 282-780-4 | 84418-68-8 | 1% | Yes |
CONTAINS VEGETABLE OIL-BASED RESIN
Notes
Note P: The carcinogen or mutagen classification does not apply because the substance contains less than 0.1 % w/w of benzene (EINECS 200-753-7).
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc. If the contaminated aera is widespread and/or there is damage to the skin, a doctor must be consulted or the patient transferred to hospital.
Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor. Keep the person exposed at rest. Do not force vomiting. Seek medical attention, showing the label. If swallowed accidentally, call a doctor to ascertain whether observation and hospital care will be necessary. Show the label.
Immediate Medical Attention
If the contaminated aera is widespread and/or there is damage to the skin, a doctor must be consulted or the patient transferred to hospital. If swallowed accidentally, call a doctor to ascertain whether observation and hospital care will be necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
sprayed water or water mist, foam, multipurpose ABC powder, BC powder, carbon dioxide (CO2)
water jet
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health. Do not breathe in smoke.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid any contact with the skin and eyes.
Prevent any material from entering drains or waterways.
Clean preferably with a detergent, do not use solvents.
Materials: detergent
Related Products
Similar products with comparable safety profiles
MINWAX® Water Based Oil-Modified Polyurethane Clear Gloss
---
SASOLWAX(TM) FT Hard waxes
---
GMF3041 GLIDDEN MAX-FLEX INTERIOR/EXTERIOR TOPCOAT MATTE CLEAR
---
PROWAX 411
CAS: 64742-61-6
9-070 DIRECT HARDENER
---
UV-topcoat LM 5075 matt
---
TETROSEAL WAX OIL
---
TALENS ACRYLIC VARNISH MATT 115; AMSTERDAM ACRYLIC VARNISH MATT 115
UFI: 9030-G0CF-000E-UKD2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wash hands after handling. Remove and wash contaminated clothing before re-using. Prevent access by unauthorised personnel.
Always wash hands after handling. Remove and wash contaminated clothing before re-using.
Handle in well-ventilated areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is adequate ventilation, especially in confined areas.
Wear suitable protective gloves in the event of prolonged or repeated skin contact. Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Type of gloves recommended: Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)), PVA (Polyvinyl alcohol).
Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles in accordance with standard EN166.
Avoid skin contact. Wear suitable protective clothing. In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605/A1 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034/A1 to prevent skin contact. Work clothing worn by personnel shall be laundered regularly.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable under the recommended handling and storage conditions in section 7.
No data available.
When exposed to high temperatures, the mixture can release hazardous decomposition products, such as carbon monoxide and dioxide, fumes and nitrogen oxide.
No data available.
No data available.
The thermal decomposition may release/form : - carbon monoxide (CO) - carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HARDWAXOIL TITAN MATT 8091?
The signal word is no signal word.
What is the physical form of HARDWAXOIL TITAN MATT 8091?
HARDWAXOIL TITAN MATT 8091 is a viscous liquid. with unspecified color.
What is the melting point of HARDWAXOIL TITAN MATT 8091?
The melting point is Not specified. and the boiling point is Not specified..