SOLBERG® TF5X, 3% FP TRAINING FOAM

remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse or persist.

remove contaminated clothes and shoes, rinse the skin or shower the person affected if necessary thoroughly with cold water and neutral soap. In case of serious reaction consult a doctor.

Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, as this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product.

Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.

Product is non-flammable under normal conditions of storage, handling and use. In the case of combustion as a result of improper handling, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the Regulation on fire protection systems.

Non-applicable

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

In case of fire, refrigerate the storage containers and tanks for products susceptible to inflammation.

Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those who do not have protection.

This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.

Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible absorbents.

Materials: sand or inert absorbent

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods.

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Product is non-flammable under normal conditions of storage, manipulation and use. It is recommended to transfer at slow speeds to avoid the generation of electrostatic charges.

Chemical protective gloves (Material: Linear low-density polyethylene (LLDPE), Breakthrough time: >480 min, Thickness: 0.062 mm). The Breakthrough Time indicated by the manufacturer must exceed the period during which the product is being used. Do not use protective creams after the product has come into contact with skin. Use gloves in accordance with manufacturer's use limitations and OSHA standard 1910.138 (29CFR).

Panoramic glasses against splash/projections. Clean daily and disinfect periodically according to the manufacturer's instructions. Use if there is a risk of splashing. Use this PPE in accordance with manufacturer's use limitations and OSHA standard 1910.133 (29CFR).

The use of protection equipment will be necessary if a mist forms or if the occupational exposure limits are exceeded.

Work clothing (Replace before any evidence of deterioration), Anti-slip work shoes (Replace before any evidence of deterioration).

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container.

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Shock and friction: Not applicable; Contact with air: Not applicable; Increase in temperature: Not applicable; Sunlight: Not applicable; Humidity: Not applicable

Avoid strong acids; Avoid alkalis or strong bases

See sub section 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO), carbon monoxide and other organic compounds.

Follow RCRA framework and EPA regulation for to ensure that hazardous waste is managed safely and properly.

It is the responsibility of the waste generator to evaluate whether his wastes are hazardous by characteristics or listing.