Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOLBERG TFSX Training Foam
- Synonyms
- SOLBERG FOAM TFSX; SOLBERG TRAINING FOAM
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Fire extinguishing medium: concentrate
Uses advised against
No uses advised against known
Manufacturers & Suppliers
SOLBERG SCANDINAVIAN AS - NORWAY
manufacturer
Olsvollstranda, NO-5938 Sæbøvågen
+47 56 34 97 00
The Solberg Company
manufacturer
1520 Brookfield Avenue, US-WI 54313 Green Bay - USA
+1 920 593 94 45
Solberg Asia Pacific Pty Ltd
manufacturer
3 Charles Street, AU-NSW 2760 st. Marys - Australia
+61 2 96 73 53 00
Emergency Contacts
Emergency Contact
+47 97 64 00 00
24h/24h
Emergency Contact
+1 920 593 94 45
24h/24h
Emergency Contact
+61 2 9430 63 96
24h/24h
Norwegian Poison Information Centre
+47 22 59 13 00
24h/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 10% | Yes |
| alcohols, C12-14, ethoxylated, sulfates, sodium salts (2,2 mol EO) EC: 500-234-8 | 68891-38-3 | 10% | Yes |
| sulfuric acid, mono-C12-14-alkyl esters, compds. with triethanolamine EC: 292-216-9 | 90583-18-9 | 1 - 3% | Yes |
| alcohols, C9-11, branched and linear, ethoxylated, sulfates, sodium salts (>1 <2.5 mol EO) EC: 500-465-4 | 160901-28-0 | 1 - 4% | Yes |
| 1-propanaminium, 3-amino-N-(carboxymethyl)-N, N-dimethyl-, N-(C8-18 and C18-unsatd. acyl) derivs., hydroxides, inner salts | 147170-44-3 | 1 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: No effects known.
Wash immediately with lots of water. Take victim to a doctor if irritation persists.
Symptoms: Tingling/irritation of the skin.
Rinse immediately with plenty of water for 15 minutes. Do not apply neutralizing agents. Take victim to an ophthalmologist.
Symptoms: Corrosion of the eye tissue. Inflammation/damage of the eye tissue.
Rinse mouth with water. Immediately after ingestion: give lots of water to drink. Do not induce vomiting. Consult a doctor/medical service if you feel unwell.
Symptoms: No effects known.
Immediate Medical Attention
Depending on the victim's condition: doctor/hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Adapt extinguishing media to the environment.
No unsuitable extinguishing media known.
On burning: release of toxic and corrosive gases/vapours (sulphur oxides, carbon monoxide - carbon dioxide) and formation of small quantities of nitrous vapours.
Dilute toxic gases with water spray.
Firefighter Protection
Gloves. Face-shield. Protective clothing. Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No naked flames.
Contain released substance, pump into suitable containers. Plug the leak, cut off the supply.
Scoop absorbed substance into closing containers. Clean contaminated surfaces with an excess of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Observe normal hygiene standards.
Keep container in a well-ventilated place. Keep out of direct sunlight. Meet the legal requirements.
Observe normal hygiene standards.
Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Chemical-resistant gloves. - materials for protective clothing (good resistance) Butyl rubber.
Face shield.
Wear gas mask with filter type A if conc. in air > exposure limit.
Protective clothing.
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
No data available.
No data available.
Keep away from naked flames/heat.
Oxidizing agents.
On burning: release of toxic and corrosive gases/vapours (sulphur oxides, carbon monoxide - carbon dioxide) and formation of small quantities of nitrous vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No (test)data on the mixture available.
12.1 Toxicity
12.2 Persistence and degradability:
12.2 Persistence and degradability
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
No (test)data on mobility of the components of the mixture available
12.5 Results of PBT and vPvB assessment:
Due to insufficient data, it cannot be determined if the components meet the PBT/vPvB criteria.
12.6 Other adverse effects
The product is not classified as contributing to the greenhouse effect or ozone depletion. 2-(2-butoxyethoxy)ethanol is identified as a ground water pollutant.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle/reuse. Dilute. Remove waste in accordance with local and/or national regulations. Hazardous waste shall not be mixed together with other waste. Different types of hazardous waste shall not be mixed together if this may entail a risk of pollution or create problems for the further management of the waste. Hazardous waste shall be managed responsibly. All entities that store, transport or handle hazardous waste shall take the necessary measures to prevent risks of pollution or damage to people or animals. May be discharged to wastewater treatment installation or reed bed. Contains a component for which a prohibition exists against discharge into surface water. Contains no organic halogen which may add to the AOX value.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contains component(s) subject to restrictions of Annex XVII of Regulation (EC) No. 1907/2006: restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is SOLBERG TFSX Training Foam known by?
SOLBERG TFSX Training Foam is also known as: SOLBERG FOAM TFSX; SOLBERG TRAINING FOAM
What is the hazard signal word for SOLBERG TFSX Training Foam?
The signal word is danger.
What is the physical form of SOLBERG TFSX Training Foam?
SOLBERG TFSX Training Foam is a liquid with no data available on colour color. It has no data available on odour odor.
What is the solubility of SOLBERG TFSX Training Foam?
water ; Complete
What is SOLBERG TFSX Training Foam used for?
Fire extinguishing medium: concentrate
What are the hazard statements for SOLBERG TFSX Training Foam?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of SOLBERG TFSX Training Foam?
The melting point is No data available and the boiling point is No data available.