Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOLBERG TF5X TRAINING FOAM
- Synonyms
- SOLBERG FOAM TF5X; SOLBERG TF5X SUPER CONCENTRATE TRAINING FOAM; SOLBERG TRAINING FOAM
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Fire extinguishing medium: concentrate
Uses advised against
No uses advised against known
Emergency Contacts
Europe, Middle East, Africa
+47 97 64 00 00
24h/24h
AMERICAS
+1 920 593 94 45
ASIA-PASIFIC
+61 2 9430 63 96
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A EC: 203-961-6 | 112-34-5 | 10% | Yes |
| N/A | --- | 3% | Yes |
| N/A EC: 500-234-8 | 68891-38-3 | 5 - 15% | Yes |
| N/A EC: 500-465-4 | 160901-28-0 | 3% | Yes |
| N/A | --- | 10% | Yes |
Notes
For H-statements in full: see heading 16. Substance with a Community workplace exposure limit. Specific concentration limits, see heading 16. Subject to restrictions of Annex XVII of Regulation (EC) No. 1907/2006.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: No effects known.
Wash immediately with lots of water. Take victim to a doctor if irritation persists.
Symptoms: Tingling/irritation of the skin.
Rinse immediately with plenty of water for 15 minutes. Do not apply neutralizing agents. Take victim to an ophthalmologist.
Symptoms: Corrosion of the eye tissue. Inflammation/damage of the eye tissue.
Rinse mouth with water. Immediately after ingestion: give lots of water to drink. Do not induce vomiting. Consult a doctor/medical service if you feel unwell.
Symptoms: No effects known.
Immediate Medical Attention
If applicable and available it will be listed below.
Medical Treatment
If applicable and available it will be listed below.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Adapt extinguishing media to the environment.
No unsuitable extinguishing media known.
On burning: release of toxic and corrosive gases/vapours (sulphur oxides, carbon monoxide - carbon dioxide) and formation of small quantities of nitrous vapours.
Dilute toxic gases with water spray. Take account of toxic/corrosive precipitation water.
Firefighter Protection
Wear Gloves, Face-shield, Protective clothing. In case of heat/fire exposure, use compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain released substance, pump into suitable containers. Plug the leak, cut off the supply.
Take up liquid spill into inert absorbent material. Scoop absorbed substance into closing containers. Clean contaminated surfaces with an excess of water. Wash clothing and equipment after handling.
Materials: inert absorbent material, e.g.: sand/earth
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Observe normal hygiene standards.
Storage temperature: -30 - 49 °C. Keep container in a well-ventilated place. Keep out of direct sunlight. Meet the legal requirements.
Observe normal hygiene standards.
Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Chemical-resistant gloves. materials (good resistance) Butyl rubber.
Face shield.
Wear gas mask with filter type A if conc. in air > exposure limit.
Protective clothing.
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
No data available.
No data available.
Keep away from naked flames/heat.
Oxidizing agents.
On burning: release of toxic and corrosive gases/vapours (sulphur oxides, carbon monoxide - carbon dioxide) and formation of small quantities of nitrous vapours.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle/reuse. Dilute. May be discharged to wastewater treatment installation or reed bed.
Remove waste in accordance with local and/or national regulations. Hazardous waste shall not be mixed together with other waste. Different types of hazardous waste shall not be mixed together if this may entail a risk of pollution or create problems for the further management of the waste. Hazardous waste shall be managed responsibly.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is SOLBERG TF5X TRAINING FOAM known by?
SOLBERG TF5X TRAINING FOAM is also known as: SOLBERG FOAM TF5X; SOLBERG TF5X SUPER CONCENTRATE TRAINING FOAM; SOLBERG TRAINING FOAM
What is the hazard signal word for SOLBERG TF5X TRAINING FOAM?
The signal word is danger.
What is the physical form of SOLBERG TF5X TRAINING FOAM?
SOLBERG TF5X TRAINING FOAM is a liquid with yellow to amber color. It has pleasant odour odor.
What is the solubility of SOLBERG TF5X TRAINING FOAM?
water;Complete
What is SOLBERG TF5X TRAINING FOAM used for?
Fire extinguishing medium: concentrate
What are the hazard statements for SOLBERG TF5X TRAINING FOAM?
This substance has 2 hazard statements:
- H315: Causes skin irritaon.
- H318: Causes serious eye damage.
What is the melting point of SOLBERG TF5X TRAINING FOAM?
The melting point is No data available and the boiling point is 95 °C.