Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- JRCure 1055
- Synonyms
- Methyl benzoylformate
Regulatory Identifiers
- CAS Number
- 15206-55-0 Check regulations →
- EC Number
- 239-263-3 Check regulations →
Identified Uses
Used for Photoinitiator etc.
Uses advised against
No information available.
Manufacturers & Suppliers
TIANJIN JIURI NEW MATERIALS CO., LTD
manufacturer
C-5/6, Vision Hill, No.1 Gonghua Road, Huayuan Hi-tech Park, Tianjin, China. 300384
+86-22-23811185
Emergency Contacts
Emergency Contact
+86-22-58330700
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methyl benzoylformate EC: 239-263-3 | 15206-55-0 | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth immediately and then drink plenty of water, seek medical attention.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, dry powder, foam.
Water jet.
Combustible. Slight fire hazard when exposed to heat or flame. Heating may cause expansion or decomposition leading to violent rupture of containers. Harmful vapours. Evolution of fumes/fog.
Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method According to the surrounding situation is used. In case of fire in the surroundings, keep containers cool by spraying with water. Eliminate all ignition sources if safe to do so.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Use personal protective equipment. Avoid breathing vapors and contacting with skin and eyes.
In case of large amount of spillage, contain a spill by bunding.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Absorb spilled material in dry sand or inert absorbent. Use spark-proof tools and explosion-proof equipment.
Materials: dry sand or inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling is performed in a well ventilated place. Wear suitable protective equipment. Avoid contact with skin and eyes. Avoid formation of dust. Keep away from heat/sparks/open flames/ hot surfaces.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat/sparks/open flames/ hot surfaces. Store away from incompatible materials such as oxidizing agents and other incompatible materials. Store away from foodstuff containers. This substance may has crystallization phenomenon at low temperature, which is a normal phenomenon.
Wear suitable protective equipment. Avoid contact with skin and eyes.
Keep away from heat/sparks/open flames/ hot surfaces.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. Use explosion-proof electrical/ventilating/lighting/equipment.
Protective gloves(such as butyl rubber), approved by EN374(EU).
Tightly fitting safety goggles (approved by EN166(EU) or NIOSH(US).
Use appropriate respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: low boiling organic solvent, Type AX, Brown, conforming to EN371.
Wear fire/flame resistant/retardant clothing and antistatic boots.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under proper operation and storage conditions.
No information available.
No information available.
Incompatible materials. High temperatures. Proximity to sources of ignition. Avoid electro-static discharge.
Strong acids, strong bases, strong oxidizing agents.
Carbon monoxide, toxic gases/vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
incineration
Before disposal should refer to the relevant national and local laws and regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is JRCure 1055 known by?
JRCure 1055 is also known as: Methyl benzoylformate
What is the hazard signal word for JRCure 1055?
The signal word is warning.
What is the physical form of JRCure 1055?
JRCure 1055 is a light yellow clear liquid appearing as light yellow clear liquid with light yellow color. It has no information available odor.
What is JRCure 1055 used for?
Used for Photoinitiator etc.
What are the hazard statements for JRCure 1055?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of JRCure 1055?
The melting point is No information available and the boiling point is 252.8°C (101.325kPa).