Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MPM Coolant Premium Longlife -40°C G13 Ready to Use
- Product Form
- Mixture
- Product Code
- 87000CVAG
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- QSKQ-5GAP-320Q-7KES
Identified Uses
Anti-freezing agents
Manufacturers & Suppliers
MPM International Oil Company BV
manufacturer
Cyclotronweg 1, NL 2629 HN Delft, Zuid Holland, Nederland
+31 (0)15 2514030
http://www.mpmoil.com
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
public, 8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water EC: 231-791-2 | 7732-18-5 | 50% | No |
| 1,2 ethanediol EC: 203-473-3 | 107-21-1 | 40 - 47.25% | Yes |
| Disodium sebacate EC: 241-300-3 | 17265-14-4 | 1.25 - 2.5% | Yes |
| Methyl-1H-benzotriazole EC: 249-596-6 | 29385-43-1 | 0.05 - 0.25% | Yes |
Notes
Contains a small amount of Bitrex (> 25 ppm), also known as Denatonium Benzoate. More information under section 11.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: Harmful if inhaled.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: May cause skin irritation / dermatitis.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophthalmologist if irritation persists.
Symptoms: Causes eye irritation.
Do NOT induce vomiting. If the person is fully conscious, make him/her drink plenty of water. Never give an unconscious person anything to drink. Get immediate medical advice/attention.
Symptoms: Harmful if swallowed.
Immediate Medical Attention
Get immediate medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, powder, foam and CO2. Fight larger fires with water spray or alcohol resistant foam.
Do not use a heavy water stream.
On exposure to high temperature, may decompose, releasing toxic vapours.
Cool containers / tanks with spray water if possible. Use a water spray to cool exposed surfaces and to protect fire-fighters.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate well. Use protective clothing. Mark out the contaminated area with signs and prevent access to unauthorized personnel.
Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal.
Dilute with plenty of water. Avoid release to the environment.
take up in non-combustible absorbent material and shovel into container for disposal.
Materials: non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Triple QX Blue Coolant Ready Mix -36°C
---
MPM Screenwash -45C Concentrate
UFI: 1UVE-C231-AT7D-GAEE
Cat® ELC™ (Extended Life Coolant) Premix 50/50
---
-40°C Acwel Organic Acid Coolant
---
Q8 Antifreeze Long Life Premixed
UFI: 80F0-N01P-000W-NJHV
Coolant VCS ready mixed mix 40/60
---
Kroon-Oil Coolant SP 12 EVO
UFI: HP60-79J0-G000-MWMC
Kroon-Oil Coolant -38 Organic NF
UFI: 2640-J9HG-K00P-E0QG
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide local exhaust or general room ventilation. Avoid aerosol formation.
Keep container tightly closed. Keep in a cool, well-ventilated place away from heat.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep in a cool, well-ventilated place away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
protective gloves
No special eye protection equipment recommended under normal conditions of use. Eye protection should only be necessary where hot liquid could be splashed or sprayed
In case of insufficient ventilation, wear suitable respiratory equipment
No special clothing/skin protection equipment is recommended under normal conditions of use
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No additional information available
No information available.
No dangerous reactions known under normal conditions of use.
Contact with incompatible materials.
No information available.
None under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MPM Coolant Premium Longlife -40°C G13 Ready to Use?
The signal word is warning.
What is the physical form of MPM Coolant Premium Longlife -40°C G13 Ready to Use?
MPM Coolant Premium Longlife -40°C G13 Ready to Use is a liquid. appearing as hygroscopic. with pink. color. It has slight. odor.
What is the solubility of MPM Coolant Premium Longlife -40°C G13 Ready to Use?
In water, material soluble.
What is MPM Coolant Premium Longlife -40°C G13 Ready to Use used for?
Anti-freezing agents
What are the hazard statements for MPM Coolant Premium Longlife -40°C G13 Ready to Use?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H373: May cause damage to organs (kidneys) through prolonged or repeated exposure (oral).
What is the melting point of MPM Coolant Premium Longlife -40°C G13 Ready to Use?
The melting point is Not available and the boiling point is > 108 °C.