NextSDS Logo
Safety Data Sheet EN

Delo XLC PG Antifreeze/Coolant - Concentrate

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Delo XLC PG Antifreeze/Coolant - Concentrate
Product Code
804150

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Antifreeze/Coolant

Manufacturers & Suppliers

C

Chevron Products UK Limited

manufacturer

1 Westferry Circus, Canary Wharf, London E14 4HA, United Kingdom

Emergency Contacts

Transportation Emergency Response

0044/(0)18 65 407333

CHEMTREC

+1 703 527 3887

Chevron Emergency Information Center

+1 510 231 0623

24 hours

Emergency Contact

0044/(0)18 65 407333

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Propane-1,2-diol EC: 200-338-0 57-55-6 80 - 98% No
Sodium 2-ethylhexanoate EC: 243-283-8 19766-89-3 0.1 - 3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If exposed to excessive levels of material in the air, move the exposed person to fresh air.

Symptoms: Not expected to be harmful if inhaled.

Skin contact

Remove clothing and shoes if contaminated. To remove the material from skin, use soap and water. Discard contaminated clothing and shoes or thoroughly clean before reuse.

Symptoms: Contact with the skin is not expected to be harmful.

Eye contact

Remove contact lenses, if worn, and flush eyes with water.

Symptoms: Not expected to cause prolonged or significant eye irritation.

Ingestion

Do not induce vomiting.

Symptoms: Not expected to be harmful if swallowed.

Immediate Medical Attention

As a precaution, get medical advice for ingestion. Get medical attention if coughing or respiratory discomfort occurs after inhalation.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

Specific hazards

A complex mixture of airborne solids, liquids, and gases including carbon monoxide, carbon dioxide, and unidentified organic compounds will be evolved when this material undergoes combustion.

Instructions

For fires involving this material, do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus.

Firefighter Protection

Do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Refer to Sections 5 and 8 for more information.

Environmental

Stop the source of the release if you can do it without risk. Contain release to prevent further contamination of soil, surface water or groundwater.

Cleanup methods

Use appropriate techniques such as applying non-combustible absorbent materials or pumping.

Materials: non-combustible absorbent materials

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash thoroughly after handling.

Storage

Not Applicable

Hygiene

Wash thoroughly after handling.

Fire prevention

Review all operations which have the potential of generating and accumulating an electrostatic charge and/or a flammable atmosphere (including tank and container filling, splash filling, tank cleaning, sampling, gauging, switch loading, filtering, mixing, agitation, and vacuum truck operations) and use appropriate mitigating procedures.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use in a well-ventilated area.

Hands

Suggested materials for protective gloves include: Neoprene, Nitrile Rubber, Polyvinyl Chloride (PVC or Vinyl).

Eyes

No special eye protection is normally required. Where splashing is possible, wear safety glasses with side shields as a good safety practice.

Respiratory

No respiratory protection is normally required.

Skin/Body

No special protective clothing is normally required. Where splashing is possible, select protective clothing depending on operations conducted, physical requirements and other substances in the workplace.

Environmental

See relevant Community environmental protection legislation or the Annex, as applicable.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Colorless
Colour
Colorless
Colour Intensity
---
Form
---
Odor
Faint or Mild
Odor Threshold
No data available
Ph
8.60 - 9 (Approximate)
Melting Point
Not Applicable
Boiling Point
170°C (338°F) (Estimated)
Flash Point
(Pensky-Martens Closed Cup) 103 °C (217 °F) (Estimated)
Freezing Point
-32°C (-25.6°F) (Typical)
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
No data available
Vapor Density
No data available
Relative Density
---
Bulk Density
---
Density
1.0420 kg/l @ 20°C (68°F) (Typical)
Flammability
No Data Available
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
Soluble in water.
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This material is considered stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

May react with strong acids or strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Not applicable

Incompatible

Not applicable

Decomposition

None known (None expected)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

This material is not expected to be harmful to aquatic organisms. The product has not been tested. The statement has been derived from the properties of the individual components.

The material is not expected to be harmful to aquatic organisms based on the properties of its individual components.

12.2 Persistence and degradability

This material is expected to be readily biodegradable. The product has not been tested. The statement has been derived from the properties of the individual components.

This material is expected to be readily biodegradable based on the properties of its individual components, as the product itself has not been tested.

12.3 Bioaccumulative potential

Bioconcentration Factor: No Data Available Octanol/Water Partition Coefficient: No data available

No data available for bioconcentration factor or octanol/water partition coefficient.

12.4 Mobility in soil

No data available.

12.5 Results of PBT and vPvB assessment

This product is not, or does not contain, a substance that is a potential PBT or a vPvB.

The product does not contain substances classified as PBT or vPvB.

12.6 Other adverse effects

No other adverse effects identified.

No other adverse effects identified.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Use material for its intended purpose or recycle if possible.

Disposal

This material, if it must be discarded, may meet the criteria of a hazardous waste as defined by international, country, or local laws and regulations.

Waste Codes

16 01 14 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

No components of this material were found on the regulatory lists 01-13.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Delo XLC PG Antifreeze/Coolant - Concentrate?

The signal word is no signal word.

What is the physical form of Delo XLC PG Antifreeze/Coolant - Concentrate?

Delo XLC PG Antifreeze/Coolant - Concentrate is a liquid appearing as colorless with colorless color. It has faint or mild odor.

What is the solubility of Delo XLC PG Antifreeze/Coolant - Concentrate?

Soluble in water.

What is Delo XLC PG Antifreeze/Coolant - Concentrate used for?

Antifreeze/Coolant

What is the melting point of Delo XLC PG Antifreeze/Coolant - Concentrate?

The melting point is Not Applicable and the boiling point is 170°C (338°F) (Estimated).