Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MPM Degreaser Extra P-60
- Product Form
- Mixture
- Product Code
- 70000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Professional use
Manufacturers & Suppliers
MPM International Oil Company BV
manufacturer
Cyclotronweg 1, NL 2629 HN Delft, Zuid Holland, Nederland
+31 (0)15 2514030
http://www.mpmoil.com
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
public, 8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(2-Butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 2.5% | Yes |
| Hydrocarbons, C10-C13, n-alkanes, iso-alkanes, cyclic aromates (2-25%) EC: 919-164-8 | --- | 50% | Yes |
| Naphthalene EC: 202-049-5 | 91-20-3 | 0.25 - 1% | Yes |
| Decahydronaphthalene EC: 202-046-9 | 91-17-8 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
No special measures are necessary.
Symptoms: Vapours may cause drowsiness and dizziness.
Wash with plenty of soap and water. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.
Symptoms: Repeated exposure may cause skin dryness or cracking.
In case of contact with eyes, rinse immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. If irritation persists, consult a specialist.
Symptoms: Eye irritation.
Do NOT induce vomiting. Call a physician immediately. Rinse mouth and drink plenty of water.
Symptoms: May be harmful if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, CO2, dry sand, or alcohol-resistant foam.
Do not use a heavy water stream.
Do not breathe gas/fumes/vapour/spray.
Eliminate all ignition sources if safe to do so. Do not use water jet. Use water spray or fog for cooling exposed containers.
Firefighter Protection
Use self-contained breathing apparatus and chemically protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of gas being released or leakage into waters, ground or the drainage system, the appropriate authorities must be informed.
Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal.
Prevent entry to sewers and public waters.
Clean up with absorbent material (for example sand, sawdust, neutral absorbent granule, silica gel).
Materials: sand, sawdust, neutral absorbent granule, silica gel
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Heavier than air, vapours may travel long distances along ground, ignite and flash back to source.
Keep container closed when not in use. Store in dry, well-ventilated area.
Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The data for this section has not been processed yet.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling- and storage conditions.
No additional information available
No dangerous reactions known under normal conditions of use.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
Strong oxidizing agent.
On burning: release of harmful/irritant gases/vapours e.g.: carbon monoxide - carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MPM Degreaser Extra P-60?
The signal word is danger.
What is the physical form of MPM Degreaser Extra P-60?
MPM Degreaser Extra P-60 is a liquid appearing as oily liquid. with orange. color. It has characteristic. odor.
What is the solubility of MPM Degreaser Extra P-60?
Emulsifiable.
What is MPM Degreaser Extra P-60 used for?
Industrial use, Professional use
What are the hazard statements for MPM Degreaser Extra P-60?
This substance has 3 hazard statements:
- H304: May be fatal if swallowed and enters airways.
- H372: Causes damage to organs (kidneys) through prolonged or repeated exposure (oral).
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of MPM Degreaser Extra P-60?
The melting point is Not available and the boiling point is > 100 °C @ 1013 hPa.