NextSDS Logo
Safety Data Sheet EN

210008 210108 Handsoap Mild

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
210008 210108 Handsoap Mild
Product Code
210008 210108

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hand soap

Manufacturers & Suppliers

BOMA logo

BOMA

distributor

Noorderlaan 131, B2030 Antwerpen

003232313389

http://www.boma.eu/

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium Laureth Sulfate EC: 500-234-8 68891-38-3 3% Yes

Notes

For the full text of the H phrases mentioned in this section, see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In case of serious or continuous discomforts: remove to fresh air and seek medical attention.

Skin contact

Rinse with water.

Eye contact

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Redness

Ingestion

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting

Immediate Medical Attention

Always ask medical advice as soon as possible should serious or continuous disturbances occur.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

If possible, remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle with care to avoid spillage.

Storage

Keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Adequate ventilation should be provided so that exposure limits are not exceeded. For further information, check section 7.

Hands

Handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station. Wash and dry your hands.

Eyes

Keep an eye-rinse bottle within reach. Tight-fitting safety goggles.

Respiratory

Respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure. If necessary, use with sufficient exhaust ventilation.

Environmental

Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions. For further information, check sections 6 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
Partition Coefficient
Not applicable
Lower Explosive Limit
---
Properties Status
---
Relative Density
1.0010 kg/l
Ph
6.8
Colour Intensity
---
Auto Ignition Temperature
---
Flash Point
---
Decomposition Temperature
---
Boiling Point
100 °C – 100 °C
Kinematic Viscosity
3,696 mm²/s
Metal Corrosion
---
Odor
characteristic
Flammability
Not applicable
Dynamic Viscosity
3,700 mPa.s
Crystallisation Point
---
State Under Standard Conditions
---
Vapor Density
Not applicable
Cloud Point
---
Softening Point
---
Solidification Point
---
Physical State Data
liquid
Vapor Pressure
---
Density
---
Solubility
---
Relative Evaporation Rate
---
Explosive Limits
---
Freezing Point
---
Evaporation Rate
0.300
Form
---
Melting Point
0 °C
Appearance
Liquid
Colour
colourless
Upper Explosive Limit
---
Solubility In Fat
---
Odor Threshold
---
Voc Content
0.000 g/l
Solubility In Water
Completely soluble
Physical State
Liquid
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Extremely high or low temperatures.

Reactivity

Stable under normal conditions.

Avoid

Protect from sunlight and do not expose to temperatures exceeding + 50°C.

Decomposition

Under recommended usage conditions, hazardous decomposition products are not expected.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

| Sodium Laureth Sulfate | LC50 (Fish): 7,1 mg/L (96h) | | --- | --- | | | EC50 (Daphnia): 7,2 mg/L | | | EC50 (Algae): 27 mg/L | | | NOEC (Algae): 0,93 mg/L | | | EC50 (soil microorganisms): 7,5 mg/L |

12.2 Persistence and degradability

The surfactants contained in this preparation comply with the biodegradability criteria as laid down in Regulation (EC) No.648/2004 on detergents.

12.3 Bioaccumulative potential

No additional data available

12.4 Mobility in soil

Water hazard class, WGK (AwSV): 1 Solubility in water: Completely soluble

12.5 Results of PBT and vPvB assessment

No additional data available

12.6 Endocrine disrupting properties

No additional data available

12.7 Other adverse effects

No additional data available
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The product may be discharged in the indicated percentages of utilization, provided it is neutralised to pH 7.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 210008 210108 Handsoap Mild?

The signal word is no signal word.

What is the physical form of 210008 210108 Handsoap Mild?

210008 210108 Handsoap Mild is a liquid appearing as liquid with colourless color. It has characteristic odor.

What is 210008 210108 Handsoap Mild used for?

Hand soap

What is the melting point of 210008 210108 Handsoap Mild?

The melting point is 0 °C and the boiling point is 100 °C – 100 °C.