Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GOJO® Mild Lotion Soap
- Product Form
- Liquid
- Product Code
- 9293-504
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cosmetics.
Manufacturers & Suppliers
GOJO Industries-Europe Ltd.
manufacturer
Units 5 & 6, Stratus Park, Brinklow, Milton Keynes, MK10 0DE
+44(0)1908588444
Supplier
distributor
+44 (0) 0844 560 5135
Emergency Contacts
Emergency Contact
+44 (0) 0844 560 5135
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sulfochem B-27 DM | --- | 10 - 20% | Yes |
| ammonium chloride EC: 235-186-4 | 12125-02-9 | 1 - 3% | Yes |
| Poly(oxy-1,2-ethanediyl), alpha-(3-carboxy-1-oxosulfopropyl)-omega-hydroxy-,C10-C16 alkylethers, disodium salts EC: 500-232-7 | 68815-56-5 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
No special measures are required.
Symptoms: Exposure to decomposition products may cause a health hazard.
No special measures required.
Symptoms: No known significant effects or critical hazards.
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses.
Symptoms: No known significant effects or critical hazards.
Do not induce vomiting unless directed to do so by medical personnel.
Symptoms: No known significant effects or critical hazards.
Immediate Medical Attention
Get medical attention if irritation occurs (eye contact). Get medical attention if symptoms occur (ingestion).
Medical Treatment
No specific treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use an extinguishing agent suitable for the surrounding fire. Use dry chemical, CO₂, alcohol-resistant foam or water spray (fog).
None known.
In a fire or if heated, a pressure increase will occur and the container may burst.
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.
Firefighter Protection
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a basic level of protection for chemical incidents.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel : No special measures required. For emergency responders : If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also Section 8 for additional information on hygiene measures.
Absorb with an inert material and place in an appropriate waste disposal container.
Not applicable.
Dilute with plenty of water. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures are required.
Store in original container, protected from direct sunlight.
Good hygiene practices and housekeeping measures
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
No special protection is required.
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts.
No special protection is required.
No special protection is required.
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
No specific test data related to reactivity available for this product or its ingredients.
Under normal conditions of storage and use, hazardous reactions will not occur.
None known.
oxidizing materials, reducing materials, metals, acids and alkalis.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GOJO® Mild Lotion Soap?
The signal word is no signal word.
What is the physical form of GOJO® Mild Lotion Soap?
GOJO® Mild Lotion Soap is a liquid. with white. color. It has none. odor.
What is GOJO® Mild Lotion Soap used for?
Cosmetics.
What is the melting point of GOJO® Mild Lotion Soap?
The melting point is Not available. and the boiling point is Not available..