NextSDS Logo
Safety Data Sheet EN

Light Moisturizing Hand Soap

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Light Moisturizing Hand Soap
Product Form
Soap (Bar, Liquid)
Product Code
488AD

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Soap (Bar, Liquid) for Body

Uses advised against

Use only as directed.

Manufacturers & Suppliers

U

Uline Shipping Supplies

12575 Uline Dr., Pleasant Prairie, WI 53158, US

1-800-295-5510

Emergency Contacts

Chemtrec

1-800-424-9300

24-Hour

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H318 Causes serious eye damage

Precautionary Statements

P280 Wear eye protection/ face protection
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Benzalkonium Chloride 0.13% w/w 68391-01-5 0.13% No
Water 7732-18-5 50 - 100% No
Lauramine Oxide 1643-20-5 10% No
Cocamidopropyl Betaine 61789-40-0 10% No
Lauramidopropylamine Oxide 61792-31-2 10% No
Sodium Chloride 7647-14-5 10% No
Myristamidopropylamine Oxide 67806-10-4 10% No
Glycerin 56-81-5 10% No
Fragrance --- 10% No
Disteareth-75 IPDI 53533-75-8 10% No
PEG-150 Distearate 9005-08-7 10% No
Citric Acid 77-92-9 10% No
Tetrasodium EDTA 64-02-8 10% No
Benzophenone-4 4065-45-6 10% No
Sodium Benzoate 532-32-1 10% No
Red 33 3567-66-6 10% No
Red 40 25956-17-6 10% No
Yellow 5 1934-21-0 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Get medical attention immediately if symptoms occur.

Skin contact

Wash off immediately with soap and plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician.

Immediate Medical Attention

Get immediate medical advice/attention. Get medical attention immediately if symptoms occur. Get medical attention if irritation develops and persists. Call a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

Do not scatter spilled material with high pressure water streams.

Specific hazards

No information available.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin, eyes or clothing. Use personal protective equipment as required.

Cleanup methods

Soak up with inert absorbent material. Pick up and transfer to properly labeled containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up. Keep out of the reach of children.

Hygiene

Do not eat, drink or smoke when using this product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Showers, Eyewash stations, Ventilation systems.

Hands

Wear suitable gloves.

Eyes

Tight sealing safety goggles.

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Wear suitable protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
1.00
Solubility In Fat
---
Voc Content
No information available
Partition Coefficient
---
Physical State
Slightly Viscous Liquid
Vapor Density
---
Bulk Density
No information available
Kinematic Viscosity
---
Auto Ignition Temperature
---
Colour
Orange-Pink
Odor Threshold
No data available
Freezing Point
---
Appearance
Clear to Slightly Hazy, Orange-Pink, Slightly Viscous Liquid
Flammability
---
Ph
5.0
Odor
Floral, Soapy
Colour Intensity
---
Lower Explosive Limit
---
Relative Evaporation Rate
---
Form
---
Cloud Point
---
Upper Explosive Limit
---
Crystallisation Point
---
Metal Corrosion
---
Solubility In Water
Miscible in water
Softening Point
No information available
Boiling Point
No data available
Density
---
Melting Point
No data available
Evaporation Rate
---
Explosive Limits
---
Dynamic Viscosity
---
State Under Standard Conditions
---
Flash Point
No data available
Molecular Weight
No information available
Physical State Data
liquid
Vapor Pressure
---
Properties Status
---
Decomposition Temperature
---
Solidification Point
---
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No data available.

Hazardous reactions

None under normal processing. Hazardous polymerization does not occur.

Avoid

None known.

Incompatible

Strong acids. Strong bases. Strong oxidizing agents.

Decomposition

Carbon oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Light Moisturizing Hand Soap?

The signal word is danger.

What is the physical form of Light Moisturizing Hand Soap?

Light Moisturizing Hand Soap is a slightly viscous liquid appearing as clear to slightly hazy, orange-pink, slightly viscous liquid with orange-pink color. It has floral, soapy odor.

What is Light Moisturizing Hand Soap used for?

Soap (Bar, Liquid) for Body

What are the hazard statements for Light Moisturizing Hand Soap?

This substance has 1 hazard statement:

  • H318: Causes serious eye damage

What is the melting point of Light Moisturizing Hand Soap?

The melting point is No data available and the boiling point is No data available.