Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SPEED CLEAN
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Speedball Art Products Co.
manufacturer
P.O. Box 5157 2301 Speedball Road Statesville, NC 28677
704-978-4166
Emergency Contacts
Emergency Contact
1-800-898-7224
Poison Control Center
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| SODIUM METASILICATE | 6834-92-0 | 1.2296% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If skin contact occurs, wash with soap and water for 5 minutes.
If eye contact occurs, rinse with tap water for 5-10 minutes.
Symptoms: irritation
Immediate Medical Attention
If irritation persists, seek medical care.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
NO SPECIAL MEDIA REQUIRED
NOT COMBUSTIBLE
NO SPECIAL FIRE FIGHTING PROCEDURES REQUIRED
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clean up in accordance with all applicable regulations. Absorb spillage with non-combustible, absorbent material.
Clean up in accordance with all applicable regulations. Absorb spillage.
Materials: non-combustible, absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Good industrial hygiene practice requires that exposure be maintained below the TLV. When exposure cannot be adequately controlled in this way, personal respiratory protection should be employed.
Good industrial hygiene practice requires that exposure be maintained below the TLV.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
KEEP OUT OF REACH OF CHILDREN.
When using wear impermeable protective gloves.
Use NIOSH-certified mask for dusts and a locally exhausting hood appropriate for the operation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
The data for this section has not been processed yet.
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
STABLE
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SPEED CLEAN?
The signal word is no signal word.
What are the hazard statements for SPEED CLEAN?
This substance has 6 hazard statements:
- EXPOSURE MAY CAUSE ACUTE OR DELAYED DAMAGE TO THE LUNGS.
- SKIN IRRITANT.
- EYE IRRITANT.
- MAY BE HARMFUL BREATHING DUSTS OR MISTS.
- CONTACT MAY RESULT IN SEVERE EYE PAIN AND IMPAIRMENT OF VISION.
- CONTACT MAY RESULT IN BLISTERING OR ULCERS OF SKIN.