Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Quick Speed
- Product Code
- 15110
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites SU22 Professional uses: publicly accessible (administration, education, entertainment, services, craftsmen)
Manufacturers & Suppliers
VEIDEC AB
manufacturer
Videvågen 9, 247 64, Veberöd
+46 46 23 89 00
http://www.veidec.com
Emergency Contacts
SOS
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated light (<0,1 % benzene) EC: 265-151-9 | 64742-49-0 | 30 - 50% | Yes |
| N,N-Dimethyl-p-toluidine EC: 202-805-4 | 99-97-8 | 1% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 20 - 30% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 20 - 30% | Yes |
| Isobutane EC: 200-857-2 | 75-28-5 | 1 - 10% | Yes |
Notes
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air.
Wash skin with soap and water.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Contact physician if larger quantity has been consumed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide or dry powder.
Do not use water jet as an extinguisher, as this will spread the fire.
Aerosol containers can explode when heated, due to excessive pressure build-up.
Follow the general fire precautions indicated by the workplace.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No recommendation given.
Do not discharge into drains, water courses or onto the ground.
Absorb spillage with non-combustible, absorbent material.
Materials: non-combustible, absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation. Take precautionary measures against static discharges.
Aerosol cans: Must not be exposed to direct sunlight or temperatures above 50°C. Keep in original container.
Keep away from heat / sparks / open flames / hot surfaces. — No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If ventilation is insufficient, suitable respiratory protection must be provided.
Chemical resistant gloves required for prolonged or repeated contact. Reference to relevant standard EN 374. Suitable materials Nitrile.
If risk of splashing, wear safety goggles or face shield.
If ventilation is insufficient, suitable respiratory protection must be provided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions and recommended use.
No specific conditions are likely to result in a hazardous situation.
No data recorded.
Avoid exposing aerosol containers to high temperatures or direct sunlight.
Avoid contact with oxidising agents.
None under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Quick Speed?
The signal word is danger.
What is the physical form of Quick Speed?
Quick Speed is a aerosol. with colourless. color. It has characteristic. odor.
What is Quick Speed used for?
SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites SU22 Professional uses: publicly accessible (administration, education, entertainment, services, craftsmen)
What are the hazard statements for Quick Speed?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.