Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TCPP, mixture of isomers
- Product Code
- 32952
Regulatory Identifiers
- CAS Number
- 13674-84-5 Check regulations →
- REACH No.
- A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Merck Life Science S.A.S
80 Rue de Luzais F-38297 SAINT QUENTIN FALLAVIER CEDEX
Emergency Contacts
CHEMTREC
+33 (0)9 75 18 14 07
I.N.R.S.
+33 (0)1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tris(2-chloro-1-methylethyl) phosphate EC: 237-158-7 | 13674-84-5 | 100% | Yes |
Sigma-Aldrich-32952 The life science business of Merck operates as MilliporeSigma in the US and Canada
Notes
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Immediate Medical Attention
No data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water Foam Carbon dioxide (CO2) Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Collect, bind, and pump off spills. Take up with liquid-absorbent material (e.g. Chemizorb®). Clean up affected area.
Materials: liquid-absorbent material (e.g. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Dodecane, mixture of isomers
CAS: 13475-82-6
Tri(propylene glycol) methyl ether, mixture of isomers
CAS: 25498-49-1
4-Methyl-1,2-cyclohexanedicarboxylic anhydride, mixture of isomers
CAS: 19438-60-9
Di(propylene glycol) methyl ether acetate, mixture of isomers
CAS: 88917-22-0
Di(propylene glycol) butyl ether, mixture of isomers
CAS: 29911-28-2
Diisopropylbenzene (mixture of isomers)
---
Di(propylene glycol) methyl ether, mixture of isomers
CAS: 34590-94-8
Isophorone diisocyanate, mixture of isomers
CAS: 4098-71-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type ABEK
required; protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical.
No data available
Strong heating.
Strong oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TCPP, mixture of isomers?
The signal word is warning.
What is the physical form of TCPP, mixture of isomers?
TCPP, mixture of isomers is a liquid with colorless color. It has no data available odor.
What is TCPP, mixture of isomers used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for TCPP, mixture of isomers?
This substance has 1 hazard statement:
- H302: Harmful if swallowed.
What is the melting point of TCPP, mixture of isomers?
The melting point is < -20 °C and the boiling point is > 288 °C.