Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Levasil CT17 M
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- G9V4-503P-Q006-524H
Identified Uses
Inorganic binder and surface modifier.
Manufacturers & Suppliers
Nouryon Pulp and Performance Chemicals AB
manufacturer
SE 445 80 Bohus, Sweden
+4631587000
Emergency Contacts
Worldwide use
+31 570 679 211
Myrkytystietokeskus
09 471 977
Kemiakuten
020 99 60 00
ORFILA / INRS
0145 42 59 59
NRCC
+86 532 838 890 90
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Amorphous Silica, aqueous colloidal solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Methyl-2H-isothiazole-3-one EC: 220-239-6 | 2682-20-4 | 0.0025 - 0.025% | Yes |
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. Consult a physician after significant exposure.
Take off contaminated clothing and shoes immediately. Wash the skin immediately with soap and water. If skin irritation persists, call a physician.
Rinse with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Only qualified personnel equipped with suitable protective equipment may intervene. Prevent unauthorised persons entering the zone.
If liquid has been spilt in large quantities clean up promptly by scoop or vacuum.
Do not flush into surface water or sanitary sewer system.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Do not breathe vapours or spray mist. Avoid contact with skin. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.
Keep container tightly closed in a dry and well-ventilated place. Keep away from direct sunlight.
Smoking, eating and drinking should be prohibited in the application area.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Effective exhaust ventilation system
Material: PVC, Material: Rubber gloves
Tightly fitting safety goggles
No personal respiratory protective equipment normally required. In the case of vapour or aerosol formation use a respirator with an approved filter.
Protective suit
Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Avoid drying out of the solution as this can lead to a build up of dust.
Copper, Mild steel, Aluminium
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container.
Dispose of contents/container in accordance with local regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Levasil CT17 M?
The signal word is warning.
What is the physical form of Levasil CT17 M?
Levasil CT17 M is a liquid with opalescent color. It has odourless odor.
What is Levasil CT17 M used for?
Inorganic binder and surface modifier.
What are the hazard statements for Levasil CT17 M?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of Levasil CT17 M?
The melting point is 0 °C and the boiling point is 100 °C.