Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Levasil CS30-125 MSXP
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Inorganic binder, surface modifier and flocculating agent.
Manufacturers & Suppliers
Nouryon Pulp and Performance Chemicals AB
manufacturer
PO BOX 47067, SE 40258 Goteborg, Sweden
+4631587000
Emergency Contacts
Emergency Contact
+31 570 679 211
Myrkytystietokeskus
09 471 977
Kemiakuten
020 99 60 00
ORFILA / INRS
0145 42 59 59
NRCC
+86 532 838 890 90
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical nature : Amorphous Silica, aqueous colloidal solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicon dioxide, amorphous | --- | --- | No |
This substance/ mixture contains nanoforms (according to REACH Regulation) Assessment : This substance/ mixture contains nanoforms (according to REACH Regulation) based on: Measurement data
Notes
Remarks : No ingredients according to the criteria in Regulation (EC) No. 1907/2006 (Annex II).
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If symptoms persist, call a physician.
Remove contaminated clothing and shoes. Rinse with water.
Rinse with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No hazards to be specially mentioned.
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow safe handling advice and personal protective equipment recommendations.
If liquid has been spilt in large quantities clean up promptly by scoop or vacuum.
No special environmental precautions required.
Wipe up with absorbent material (e.g. cloth, fleece). If liquid has been spilt in large quantities clean up promptly by scoop or vacuum.
Materials: absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. No special handling advice required.
Keep container tightly closed in a dry and well-ventilated place. Keep away from direct sunlight. Do not freeze.
General industrial hygiene practice.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Effective exhaust ventilation system
Material : PVC, Material : Rubber gloves
Safety glasses
No personal respiratory protective equipment normally required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Avoid drying out of the solution as this can lead to a build up of dust.
Copper, Mild steel, Aluminium
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
12.1 Toxicity
12.2 Persistence and degradability
The product is inorganic and biodegradability is not applicable. No data available for BOD.
12.3 Bioaccumulative potential
No bioaccumulation is expected.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.7 Other adverse effects
None known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Empty remaining contents.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Reinforced medical supervision (R4624-23): The product has no CMR properties category 1, 1A or 1B
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Levasil CS30-125 MSXP?
The signal word is no signal word.
What is the physical form of Levasil CS30-125 MSXP?
Levasil CS30-125 MSXP is a liquid appearing as clear, cloudy with clear, cloudy color. It has slight odor.
What is Levasil CS30-125 MSXP used for?
Inorganic binder, surface modifier and flocculating agent.
What is the melting point of Levasil CS30-125 MSXP?
The melting point is 0 °C and the boiling point is 100 °C.