Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOPON ST
- Product Code
- BK9266
- Chemical Name
- Tetraalkyl alkylenediamine, propoxylated
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- All components are REACH compliant.
- UFI Code
- 4JNT-10EY-Q00D-600F
Identified Uses
Dispersant, Formulating agent, Additive for Paint
Manufacturers & Suppliers
BK Giulini GmbH
distributor
Dr.-A.-Reimann-Str. 2, D-68526 Ladenburg, Germany
+49 6203 / 77-0
http://www.icl-group.com
Emergency Contacts
Europe
+49 6203 77 7141
Austria
+43 (0)1 406 43 43
Czech Republic
+420 224 919 293
Czech Republic
+420 224 915 402
France
+33 (0)1 45 42 59 59
Italy
+39 06 68593726
24 hour/7 days
Romania
+40 (0)21 318 36 06
Slovakia
+421 (0)2 54 774 166
Denmark
+45 82 12 12 12
Hungary
+36 (06) 80 201-199
Portugal
+351 800 250 250
Belgium
+32 (0)70 245 245
Finland
0800 147 111
Open 24 hours a day
Finland
09 471 977
Slovenia
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous alkaline solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetraalkyl alkylenediamine, propoxylated EC: 442-730-6 | 35132-93-5 | 10 - 25% | Yes |
| propane-1,2-diol EC: 200-338-0 | 57-55-6 | 2.5 - 10% | No |
Full text of H- and EUH-phrases: see section 16
Notes
This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59)
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing has stopped, give artificial respiration. Get medical attention immediately. Delayed pulmonary edema may occur. Get immediate medical advice/attention.
Symptoms: Inhalation of corrosive fumes/gases may cause coughing, choking, headache, dizziness, and weakness for several hours. Pulmonary edema may occur with tightness in the chest, shortness of breath, bluish skin, decreased blood pressure, and increased heart rate.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical advice/attention.
Symptoms: Corrosive.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area. Get immediate medical advice/attention.
Symptoms: Burning sensation. May cause blindness.
Immediate medical attention is required. Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical advice/attention.
Symptoms: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Product is a corrosive material. Possible perforation of stomach or esophagus should be investigated. Asphyxia from glottal edema may occur. Marked decrease in blood pressure may occur with moist rales, frothy sputum, and high pulse pressure.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
The product causes burns of eyes, skin and mucous membranes. Thermal decomposition can lead to release of irritating gases and vapors. Contact with metals may evolve flammable hydrogen gas.
Cool containers with water spray.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Do not use steel or aluminum tools or equipment.
Dike to collect large liquid spills.
Prevent further leakage or spillage if safe to do so. Do not allow to enter into soil/subsoil. Prevent product from entering drains. Keep out of waterways.
Take up with sand or other noncombustible absorbent material and place into containers for later disposal. Wash spill site with water after material pickup is complete. Following product recovery, flush area with water.
Materials: sand or other noncombustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle product only in closed system or provide appropriate exhaust ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Reacts with aluminum and its alloys. When diluting, always add the product to water. Never add water to the product. Keep containers tightly closed.
Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from moisture. Store locked up. Keep out of the reach of children. Store away from other materials. Recommended storage temperature between 15-30°C. Protect from frost.
Do not get in eyes, on skin, or on clothing. Do not breathe vapor or mist. Wear suitable gloves and eye/face protection. Wash hands and face before breaks and immediately after handling the product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Regular cleaning of equipment, work area and clothing is recommended. Keep away from food, drink and animal feeding stuffs. Safety shower and eye bath should be provided.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Eyewash stations, Showers, Ventilation systems
Wear suitable gloves, Impervious gloves, Neoprene gloves, Chloroprene gloves, Fluorocarbon rubber (Viton). The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tight sealing safety goggles. Face protection shield.
Wear an approved respirator in the absence of adequate ventilation. In the event mists or aerosols are generated, use a respirator equipped with an appropriate filter.
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Corrosive to metals.
Strong exothermic reaction with acids. Contact with metals may evolve flammable hydrogen gas.
Extremes of temperature and direct sunlight.
Oxidizing agent. Acids. Metals.
Fire can cause release of.: NOx, CO, CO2, Ammonia.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in a safe manner in accordance with local/national regulations.
This material and its container must be disposed of as hazardous waste. Should not be released into the environment. Must not be disposed of together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3267
- Shipping Name
- Corrosive liquid, basic, organic, n.o.s. (Tetraalkyl alkylenediamine, propoxylated)
- Transport Class
- 8
- Packing Group
- III
Special Provisions 223, 274
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Products that are used as food additives are exempt from listing in international chemical inventories
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOPON ST?
The signal word is danger.
What is the physical form of LOPON ST?
LOPON ST is a liquid appearing as aqueous solution with light yellow color. It has characteristic. odor.
What is the solubility of LOPON ST?
No data available
What is LOPON ST used for?
Dispersant, Formulating agent, Additive for Paint
What are the hazard statements for LOPON ST?
This substance has 2 hazard statements:
- H290: May be corrosive to metals
- H314: Causes severe skin burns and eye damage
What is the melting point of LOPON ST?
The melting point is ~ -7 °C and the boiling point is ~100 °C.