Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NX 795
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 246-771-9 Check regulations →
- REACH No.
- 01-2119441305-48-0002
Identified Uses
Industrial use, Raw material, Intermediate, Additive, Carrier, Adhesives, Water-borne coatings, Lubricants and lubricant additives, Drilling applications, Flocculating agent Intermediate
Manufacturers & Suppliers
Synthomer Speciality Additives AB.
manufacturer
Durmakker 33, 9940 Evergem
+3292571717
Emergency Contacts
Emergency Contact
+44 (0) 1235 239 670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isobutyric acid, monoester with 2,2,4-trimethylpentane-1,3-diol EC: 246-771-9 | --- | --- | No |
Notes
No dangerous ingredients according to Regulation (EC) No. 1907/2006
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with plenty of water.
Rinse thoroughly with plenty of water, also under the eyelids.
Get medical attention if symptoms occur. If large quantities of this material are swallowed, call a physician immediately.
Immediate Medical Attention
If large quantities of this material are swallowed, call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product is compatible with standard fire-fighting agents. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
May release toxic, irritating and/or corrosive gases.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain spillage, soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations (see section 13).
Large spills should be collected mechanically (remove by pumping) for disposal. Pick up and transfer to properly labelled containers. After cleaning, flush away traces with water.
The product should not be allowed to enter drains, water courses or the soil.
Clean-up methods - small spillage: Contain spillage, soak up with non-combustible absorbent material. Large spills should be collected mechanically (remove by pumping) for disposal. After cleaning, flush away traces with water.
Materials: sand, earth, diatomaceous earth, vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice.
Keep tightly closed.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special precautions required.
Material : Nitrile rubber; Material : Chloroprene; Material : butyl-rubber; Remarks : Protective gloves complying with EN 374.
Safety goggles
not required under normal use
Long sleeved clothing
The product should not be allowed to enter drains, water courses or the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
None known.
Heat
Strong oxidizing agents
Carbon dioxide (CO2), Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Can be landfilled or incinerated, when in compliance with local regulations.
Dispose of in accordance with local regulations. Can be landfilled or incinerated, when in compliance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NX 795?
The signal word is no signal word.
What is the physical form of NX 795?
NX 795 is a liquid appearing as liquid with colourless color. It has slight odor.
What is NX 795 used for?
Industrial use, Raw material, Intermediate, Additive, Carrier, Adhesives, Water-borne coatings, Lubricants and lubricant additives, Drilling applications, Flocculating agent Intermediate
What is the melting point of NX 795?
The melting point is -70.25 °C and the boiling point is 257 °C.