NextSDS Logo
Safety Data Sheet EN

SPECTRUS NX1102

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SPECTRUS NX1102

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Solvent-based microbial control agent.

Manufacturers & Suppliers

G

GE Betz, Inc.

manufacturer

4636 Somerton Road, Trevose, PA 19053

215 355-3300

Emergency Contacts

Emergency Contact

(800) 877-1940

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 May cause moderate irritation to the skin.
H317 Potential skin sensitizer.
H318 Corrosive to the eyes.
H335 Mists/aerosols cause irritation to the upper respiratory tract.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
DBNPA (2,2-DIBROMO-3-NITRILOPROPIONAMIDE) Corrosive (eyes); Skin irritant 10222-01-2 15 - 40% Yes
SODIUM BROMIDE Mild skin and eye irritant 7647-15-6 3 - 7% Yes
DIBROMOACETONITRILE Irritant (skin); IARC=2B 3252-43-5 1 - 5% Yes
WATER 7732-18-5 --- No
POLYETHYLENE GLYCOL 25322-68-3 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing is difficult, give oxygen. If breathing has stopped, give artificial respiration. Get immediate medical attention.

Skin contact

Wash thoroughly with soap and water. Remove contaminated clothing. Thoroughly wash clothing before reuse. Get medical attention if irritation develops or persists.

Eye contact

URGENT! Immediately flush eyes with plenty of low-pressure water for at least 20 minutes while removing contact lenses. Hold eyelids apart. Get immediate medical attention.

Ingestion

Immediately contact physician. Dilute contents of stomach using 2-8 fluid ounces (60-240 mL) of milk or water.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

For eye injury, consult with an ophthalmologist promptly.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Flood with water.

Unsuitable media

Use of CO2 or foam may not be effective.

Instructions

Fire fighters should wear positive pressure self-contained breathing apparatus (full face-piece type).

Firefighter Protection

Fire fighters should wear positive pressure self-contained breathing apparatus (full face-piece type).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate area. Use specified protective equipment. Contain and absorb on absorbent material. Place in waste disposal container. Flush area with water. Spread sand/grit. Neutralize with soda ash.

Cleanup methods

Contain and absorb on absorbent material. Place in waste disposal container. Flush area with water. Spread sand/grit. Neutralize with soda ash.

Materials: absorbent material, sand/grit, soda ash

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Acidic. Corrosive(Eyes). Do not mix with alkaline material.

Storage

Keep containers closed when not in use. Avoid excessive heat and contamination. Store only in vented containers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Colorless To Brown
Colour
---
Colour Intensity
---
Form
---
Odor
Slight
Odor Threshold
---
Ph
1.9
Melting Point
---
Boiling Point
---
Flash Point
SETA(CC): > 212F > 100C
Freezing Point
~ -18
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
< 1.00
Vapor Pressure
< 0.1
Vapor Density
> 1.00
Relative Density
1.269
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
100.0
Solubility In Fat
---
Molecular Weight
---
Voc Content
0.0
Metal Corrosion
---
Dynamic Viscosity
64
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage conditions.

Hazardous reactions

Contact with strong bases may cause a violent reaction releasing heat and hydrogen bromide.

Avoid

Above 120 deg. C

Incompatible

bases or strong oxidizers

Decomposition

oxides of carbon and nitrogen, hydrogen bromide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3265
Shipping Name
CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.(2,2, DIBROMO-3-NITRILOPROPIONAMIDE)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SPECTRUS NX1102?

The signal word is danger.

What is the physical form of SPECTRUS NX1102?

SPECTRUS NX1102 is a liquid appearing as colorless to brown . It has slight odor.

What is SPECTRUS NX1102 used for?

Solvent-based microbial control agent.

What are the hazard statements for SPECTRUS NX1102?

This substance has 4 hazard statements:

  • H315: May cause moderate irritation to the skin.
  • H317: Potential skin sensitizer.
  • H318: Corrosive to the eyes.
  • H335: Mists/aerosols cause irritation to the upper respiratory tract.