Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Raw NX 800
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coatings
Uses advised against
None known.
Manufacturers & Suppliers
Synthomer Speciality Additives AB.
manufacturer
Durmakker 33, 9940 Evergem
+3292571717
Emergency Contacts
Emergency Contact
+44 (0) 1235 239 670
24 hour(s)
EN
Emergency Contact
+31 10 713 8195
NL
Emergency Contact
+33 1 72 11 00 03
FR
Antipoisons-Antigifcentrum
+32 02 264 96 36
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-isopropyl-2,2-dimethyltrimethylene diisobutyrate EC: 229-934-9 | 6846-50-0 | 50 - 75% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Wash with plenty of water. If irritation (redness, rash, blistering) develops, get medical attention.
Symptoms: irritation (redness, rash, blistering)
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
Rinse mouth. Obtain medical attention if symptoms appear or if large quantities have been ingested.
Immediate Medical Attention
If irritation (redness, rash, blistering) develops, get medical attention. If eye irritation persists, get medical advice/attention. Obtain medical attention if symptoms appear or if large quantities have been ingested.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As appropriate for surrounding fire.
Direct water jet may spread the fire.
Product is not classified as flammable, but will burn on contact with flame or exposure to high temperature.
Fight fire with normal precautions from a reasonable distance. Keep containers cool by spraying with water if exposed to fire.
Firefighter Protection
Fire fighters should wear complete protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Shut off leaks if without risk. Provided it is safe to do so, isolate the source of the leak.
Allow small spillages to evaporate provided there is adequate ventilation.
Avoid release to the environment.
Adsorb spillages onto sand, earth or any suitable adsorbent material. Transfer to a container for disposal.
Materials: sand, earth or any suitable adsorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure operatives are trained to minimise exposures. Avoid inhalation of high concentrations of vapours. In case of inadequate ventilation wear respiratory protection. Avoid all contact with substance. Do not ingest. Wear protective gloves/eye protection. Avoid exposure during pregnancy.
Keep container tightly closed. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources. Keep cool. Protect from sunlight.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Store away from heat and ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources.
Wear impervious gloves (EN374). Gloves should be changed regularly to avoid permeation problems. Breakthrough time of the glove material: refer to the information provided by the gloves' producer. Protective index 6, corresponding > 480 minutes of permeation time according to EN 374. Recommended: Nitrile rubber (Minimum thickness 0.11mm)
Wear goggles giving complete protection to eyes to protect against liquid splashes (EN166).
In case of inadequate ventilation wear respiratory protection. The use of a high efficiency filter (EN143) is recommended.
Wear suitable coveralls to prevent exposure to the skin.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
None anticipated. Product is not classified as flammable, but will burn on contact with flame or exposure to high temperature. Hazardous polymerisation will not occur.
contact with flame or exposure to high temperature
Strong oxidising agents.
None anticipated. Combustion may cause toxic fumes. (Carbon monoxide, Carbon dioxide).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Harmful to aquatic life with long lasting effects.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and VPVB assessment
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not allow to enter drains, sewers or watercourses.
Dispose of this material and its container as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
See Section: 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Authorisations and/or Restrictions On Use: Not restricted
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Raw NX 800?
The signal word is warning.
What is the physical form of Raw NX 800?
Raw NX 800 is a liquid appearing as colourless liquid with colourless color. It has slight odor.
What is the solubility of Raw NX 800?
0.9-13 mg/l @ 25 °C (Water)
What is Raw NX 800 used for?
Coatings
What are the hazard statements for Raw NX 800?
This substance has 2 hazard statements:
- H361: Suspected of damaging fertility or the unborn child.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Raw NX 800?
The melting point is -70 °C and the boiling point is 281 °C.