Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Piperazine app. 68%
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- J4JN-60X2-C00R-R6SR
Identified Uses
Chemical used in synthesis and/or formulation of industrial products, Chemical, gas scrubber absorption aid, Formulation & (re)packing of substances and mixtures, for industrial use only
Manufacturers & Suppliers
BASF plc
national supplier
4th and 5th Floors, 2 Stockport Exchange, Railway Road, Stockport, SK1 3GG, UNITED KINGDOM
+44 161 475 3000
Emergency Contacts
International emergency number
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
nitrogenous compounds, heterocyclic, in water
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| piperazine EC: 203-808-3 | 110-85-0 | 67 - 69% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention. Immediately administer a corticosteroid from a controlled/metered dose inhaler.
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
Do not induce vomiting. Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Immediate Medical Attention
Seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, dry powder, foam, carbon dioxide
carbon monoxide, Carbon dioxide, nitrous gases
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Allow to solidify and sweep/shovel up.
Allow to solidify and sweep/shovel up.
Do not discharge into drains/surface waters/groundwater.
Collect waste in suitable containers, which can be labeled and sealed.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid/prevent any exposure and emissions. Avoid frequent and direct contact with substance. Ensure minimization of manual phases. In case of potential exposure: Wear suitable respiratory protection. Wear chemically resistant gloves in combination with intensive management supervision control. Use suitable eye protection. Wear suitable working clothes. Handle in accordance with good industrial hygiene and safety practice.
Keep container tightly closed and dry; store in a cool place. Keep away from sources of ignition - No smoking.
Remove contaminated clothing and protective equipment before entering eating areas. Hands and/or face should be washed before breaks and at the end of the shift. When using do not eat, drink or smoke.
The product is combustible. Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN ISO 374-1) Performance level 6, corresponding to a breakthrough time of >480 min according to EN ISO 374-1 fluoroelastomer (FKM) - 0.7 mm coating thickness butyl rubber (butyl) - 0.7 mm coating thickness polyvinylchloride (PVC) - 0.7 mm coating thickness nitrile rubber (NBR) - 0.4 mm coating thickness chloroprene rubber (CR) - 0.5 mm coating thickness
Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.
Breathing protection if breathable aerosols/dust are formed. Combination filter for gases/vapours of organic compounds and solid and liquid particles (f.e. EN 14387 Type A-P2)
chemical protection overall (f.e. according to EN 13982) if dust is formed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: Corrosive effects to metal are not anticipated.
Strong exothermic reaction with acids.
Avoid extreme temperatures.
Copper, acids, acid forming substances, nitrosating agents, non-ferrous metals
nitrosamines, carbon monoxide, Carbon dioxide, nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate in suitable incineration plant, observing local authority regulations.
This product and any uncleaned containers must be disposed of as hazardous waste in accordance with the 2005 Hazardous Waste Regulations and amendments (United Kingdom)
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2579
- Shipping Name
- PIPERAZINE MIXTURE, MOLTEN
- Transport Class
- 8
- Packing Group
- III
Tunnel code: E
None known
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Piperazine app. 68%?
The signal word is danger.
What is the physical form of Piperazine app. 68%?
Piperazine app. 68% is a hot molten appearing as hot molten with colourless to yellow color. It has amine-like odor.
What is Piperazine app. 68% used for?
Chemical used in synthesis and/or formulation of industrial products, Chemical, gas scrubber absorption aid, Formulation & (re)packing of substances and mixtures, for industrial use only
What are the hazard statements for Piperazine app. 68%?
This substance has 4 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H361fd: Suspected of damaging fertility. Suspected of damaging the unborn child.
What is the melting point of Piperazine app. 68%?
The melting point is 29 - 48 °C and the boiling point is 100 - 148 °C.