NALCO® 1393T

Remove to fresh air. Treat symptomatically. Get medical attention if symptoms occur.

Wash off immediately with plenty of water for at least 15 minutes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.

Rinse mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Not flammable or combustible.

In the event of fire and/or explosion do not breathe fumes.

Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoid inhalation, ingestion and contact with skin and eyes. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8. If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.

dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.

Do not allow contact with soil, surface or ground water.

Collect with non-combustible absorbent material and place in container for disposal. Flush away traces with water.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite), water

Do not ingest. Do not breathe spray, vapour. Do not get in eyes, on skin, or on clothing. Wash hands thoroughly after handling. Use only with adequate ventilation.

Keep out of reach of children. Keep container tightly closed. Store in suitable labelled containers.

Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard.

Effective exhaust ventilation system. Maintain air concentrations below occupational exposure standards.

Recommended preventive skin protection Gloves Nitrile rubber butyl-rubber Breakthrough time: 1 – 4 hours Minimum thickness for butyl-rubber 0.7 mm for nitrile rubber 0.4 mm or equivalent (please refer to the gloves manufacturer/distributor for advise). Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Safety goggles Face-shield

When respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization, consider the use of certified respiratory protection equipment meeting EU requirements (89/656/EEC, (EU) 2016/425), or equivalent, with filter type: A-P

Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing including appropriate safety shoes

Consider the provision of containment around storage vessels.

Stable under normal conditions.

No dangerous reaction known under conditions of normal use.

No dangerous reaction known under conditions of normal use.

Extremes of temperature

Mild steel Aluminium Strong bases

Depending on combustion properties, decomposition products may include following materials: Carbon oxides Oxides of phosphorus

Not applicable.

Not applicable.

Not applicable.