Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DINITROL 479
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Anticorrosion additive
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
DINOL GmbH
manufacturer
Pyrmonter Str. 76, D-32676 Lügde
+49 5281 9829 80
Emergency Contacts
Giftnotruf Berlin
+49(0)30 30686 790
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated heavy EC: 919-857-5 | 64742-48-9 | 25 - 50% | Yes |
| Ethanol EC: 200-578-6 | 64-17-5 | 1 - 5% | Yes |
For the wording of the listed risk phrases refer to section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air or oxygen; call for doctor.
If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Immediate Medical Attention
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder.
Water, Water with full jet
No further relevant information available.
Firefighter Protection
Mount respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Use only in well ventilated areas.
Keep container tightly sealed.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Not required. Material of gloves: Nitrile rubber. Recommended thickness of the material: ≥ 0.12 mm. Penetration time of glove material: > 480 min. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter AX.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1139
- Shipping Name
- 1139 COATING SOLUTION, special provision 640E
- Transport Class
- 3 Flammable liquids.
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DINITROL 479?
The signal word is warning.
What is the physical form of DINITROL 479?
DINITROL 479 is a pasty appearing as pasty, black with black color. It has characteristic odor.
What is DINITROL 479 used for?
Anticorrosion additive
What are the hazard statements for DINITROL 479?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
What is the melting point of DINITROL 479?
The melting point is Undetermined. and the boiling point is 130 °C.